Loading ...
Loading ...
Loading ...
Using a Bluetooth
h
eadphone
By pairing a Bluetooth headphone to the handset,
you can enjoy hands-free conversations when
talking over the phone.
Important:
R Your Bluetooth headphone must support the
Hands Free Profile (HFP) specification.
R Up to 4 Bluetooth headphones can be paired to
the handset.
R Only 1 Bluetooth headphone can be used with
the unit at a time.
R For best performance, we recommend using
your Bluetooth headphone within 3 m (10 feet)
of the handset. The handset can communicate
with Bluetooth headphones within an
approximately 10 m (33 feet) range without any
obstacles or line of sight.
Turning Bluetooth feature on/off
O
nce this feature is turned on, the Bluetooth
MPAIRN button is enabled for use and the handset
can perform other Bluetooth functions. The default
setting is “Off”.
1 To turn on:
Press MPAIRN.
To turn off:
MMENUN#613
2 MbN: Select the desired setting. a MSAVEN
3 MOFFN
Pairing a Bluetooth headphone to the
h
andset
Important:
R Refer to the headphone’s operating instructions.
If your headphone PIN is not “0000”, change
the Bluetooth PIN beforehand (page 18).
1 Bluetooth headphone:
Set your headphone to pairing mode.
2 Handset:
Press and hold MPAIRN for about 3 seconds.
3 Wait until a long beep sounds.
R When
is displayed, the headphone is
a
vailable for use.
*1
*1 Corresponding headphone number is
indicated next to the item.
Note:
R I
n step 2, if the handset has been paired with a
maximum of 4 headphones, you can overwrite
any unwanted headphone by pressing MYESN
a MbN: Select the desired headphone. a
MSELECTN
R If you cannot pair the headphones to the
handset, make sure that the Bluetooth
headphones are not connected to another
Bluetooth device.
Connecting/disconnecting a
B
luetooth headphone
Headphones that are on can be connected
automatically with the paired handset, while
headphones that are off will be disconnected from
the handset.
If the headphones do not connect automatically or
if you want to use them with another Bluetooth
device, you may need to connect/disconnect them
manually.
Important:
R Make sure that the headphone is turned on.
1 To connect/disconnect:
Press MPAIRN. a MbN: Select the desired
headphone. a MSELECTN
2 MbN: “Connect” or “Disconnect”a
MSELECTN
R A long beep sounds.
R If another headphone is already connected
when “Connect” is selected, the unit
prompts you to disconnect the Bluetooth
connection with the current headphone. a
MYESN
3 MOFFN
Note:
R A disconnected headphone is not unpaired from
the handset, so pairing it to the handset again is
unnecessary.
For assistance, please visit http://shop.panasonic.com/support
17
Using Bluetooth® Headphone
KX-TGF892_(en-us)_0426_ver201.pdf 17 4/26/2022 3:14:18 PM
Loading ...
Loading ...
Loading ...