Loading ...
Loading ...
Loading ...
9
Troubleshooting Guide
You can solve many common Beverage Center problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem before
calling a service technician.
Problem
Possible causes
Ways to solve problem
The unit does not operate
Bad connection of
plug or fuse burnt out
Unplug the power cord and re-connect
the plug to power supply, or replace
with a new fuse
Abnormal operation of the
compressor or has buzzing
sound
The power voltage is
out of rated range
Disconnect the power supply
immediately and reconnect with it after
normal voltage has be supplied. It is
necessary to have a voltage stabilizer
in case of poor power supply.
Compressor operates too
long and no frost on the
surface of the evaporator
Refrigeration system
is at fault (leakage or
blocked)
Call for service
There is frost or ice on the
walls of the inner cabinet and
internal temperature is too
low, the compressor never
stops running.
Thermostat does not
work
Call for service
The temperature
setting of the
thermostat is too low.
Adjust the thermostat counter-
clockwise to a smaller number
The internal temperature is
too high and the compressor
never stops operating.
Bad heat dissipation
and ventilation of
condenser
Improve ventilation
Too much warm food
was put in at one time
Remove some food/beverage so air
can circulate
Door is being opened
too frequently during
initial pull down or half
reload
Permit the unit to cool down to the
thermostat temperature; prevent
product access during this phase
Too much noise
The unit is not level
Adjust the adjustable legs
The fastener of the
unit is loose
Tighten the loose fastener
Pipes near the
compressor are
touching
Carefully separate the pipes
Loading ...
Loading ...