Loading ...
Loading ...
Loading ...
ice & Water Dispenser (on some models)
Built-In Refrigerators
Dispense,"
with
glass-touch
controls
How it Works
The electronic controls on the dispenser are
truly interactive. The control panel is equipped
with a proximity sensor that causes the panel
to light up as you approach the dispenser
(approx. 2 inches). To make a selection,
simply touch the graphic for the feature you
w_ant, and tile halo for that feature will light
up. When you walk away fi'om the refrigerator,
the lighted graphics switch off automatically.
SpirtShelf
\ \
How to Use
To dispense _.ter or ice: select WATER _,
CUBED ICE _ or CRUSHED ICE _.
Then press the glass gently against the
top of the dispenser cradle.
The spill shelf is not self<lraining. To reduce
water spotting, the shelf and its grille should
be cleaned regularly.
If no ,a-ater is dispensed when the refrigerator
is first installed, there may be air in the water
line system. Press the dispenser cradle fbr at
least two minutes to remove trapped air from
the water line and to fill the water system.
To flush out impurities in the water line,
throw away the first gallon of water.
CAUTION: Never put fingers
or any other objects into the ice crusher
discharge opening.
Locking the Dispenser:
Touch CONTROL LOCK for
3 seconds to lock the dispenser
and control pad. To unlock,
touch it again for 3 seconds.
Dispenser Light:
This fizature turns the night fight
on and off. The light also comes
k,+0
on when the dispenser cradle is
pressed. If this light burns out,
it should be replaced with a 6 w-att
12V maximum bulb. The bulb is
available through GE Parts and Accessories,
800.626.2002. Order part number WR02X10675.
Door Alarm:
To turn the Door Alarm feature
on, touch DOOR ALARM once.
To turn it of[, press it again.
When the DOORALARM
is active, the alarm will flash and beep if you
keep the door open for more than 2 minutes.
®
10
Loading ...
Loading ...
Loading ...