Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
The loading
door does not
close
The filter is not locked into posi‐
tion.
Put the filter in the correct position.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
It is not possible
to change the
programme or
option.
After a cycle starts it is not possi‐
ble to change the programme or
option.
Turn the tumble dryer off and on.
Change the programme or option
as required.
It is not possible
to select an op‐
tion. An acoustic
signal is emit‐
ted.
The option you tried to select is not
available for the selected pro‐
gramme.
Turn the tumble dryer off and on.
Change the programme or option
as required.
There is no
drum light
Defective drum lamp. Contact the service centre to re‐
place the drum lamp.
Unexpected du‐
ration time ap‐
pears on the
display.
The drying duration is calculated
according to load size and damp‐
ness.
This is automated - the appliance
is working correctly.
A programme is
inactive.
The water container is full. Drain the water container, push the
Start/Pause button.
2)
The drying cycle
is too short.
The load size is small. Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recommend
short drying times.
The laundry is too dry. Select an appropriate time pro‐
gramme or a higher dryness level
(e.g.
extra dry
)
www.aeg.com24
Loading ...
Loading ...
Loading ...