Loading ...
Loading ...
Loading ...
ActionPossible causesProblem
Loosen the drainage hose where it con-
nects to the sink unit's water trap. Check
that no debris has fastened. Is the cone-
shaped part of the pipe cut to an inner
diameter of at least 14 mm?
Blocked drainage hose.Water remains in the dishwasher.
Check that the hose is free from kinks
and sharp bends.
Kink in drainage hose.
Clean the coarse and fine filters.The filters are blocked.
Ensure filter is completely locked with
handle pointing towards the door.
The filter is not locked in completely.
Clean the drainage pump. See the
chapter Care and cleaning.
Debris in the drainage pump.
Clean with washing-up brush and low
foaming cleaner.
Dirt around the seals and in corners.Bad odour in dishwasher.
Run a program with a higher tempera-
ture about once a month.
Low temperature programs have been
selected for a prolonged period.
Activate the Extra dry option.Drying result poor.The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully loaded.
Top up with rinse aid or increase the
rinse aid dosage. See the sections Be-
fore washing for the first time and Set-
tings.
Rinse aid needs topping up or dosage
is set too low.
Open the door a little once the program
has finished.
13
Loading ...
Loading ...
Loading ...