Loading ...
Loading ...
Loading ...
Troubleshooting
ActionType of fault on the display
Clear the drainage pump. See the chapter Care and cleaning. If the problem
persists, call the service department.
OverfillingF10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem
persists, call the service department.
Water outlet faultF11
Check whether dishwasher inlet hose is connected to a pressure limiting valve
(some pressure limiting valves may restrict the supply of water to the dishwasher).
Water inlet faultF12
Check that the water tap is on. Check that the outer filter on the inlet hose is not
blocked. If the problem persists, call the service department.
Turn off the water tap and call the service department.Inlet valve leakageF40
Check that the outer filter on the inlet hose is not blocked. Also check that the
drainage hose is fitted in accordance with the installation instructions. If the
problem persists, call the service department.
Water level faultF52
Turn off the water tap and call the service department.OverfillingF54
Call the service department.Circulation pump faultF56
Press any button to clear the error message.
ActionPossible causesProblem
Wait a moment then try again.You have pressed the buttons too soon
after opening the door.
The buttons do not react when pressed.
Clean with a dry or slightly damp cloth.The buttons are dirty.
Open the door. The buttons only react
to use when the door is open.
The door is closed.
Check that the baskets are correctly po-
sitioned horizontally.
The baskets are not correctly positioned.Cannot close door.
Check that the dishes are not blocking
the baskets from sliding properly into
place.
Check.The door is not properly closed.The dishwasher does not start.
Close the door and wait. After a while,
the dishwasher continues the program.
You have opened the dishwasher to add
more dishes while a program is in
progress.
Check.A fuse/circuit breaker has been tripped.
Check.The plug is not plugged into the wall
socket.
Check.The water tap is turned off.
Check.Overflow/leaks
Turn off the water tap. Pull out the plug
and call the service department.
A whirring sound (the drainage pump)
is heard from the dishwasher and does
not stop when the main power switch is
turned off.
Press and hold the main power switch
until the display turns off if you want to
cancel the Delayed start option. Restart
the dishwasher.
Check that the Delayed start option has
not been selected.
11
Loading ...
Loading ...
Loading ...