Loading ...
Loading ...
Loading ...
23
EN
REPLACING THE LAMP
1. Disconnect the oven from the power supply.
2. Unscrew the cover from the light, replace the bulb
and screw the cover back on the light.
3.
Reconnect the oven to the power supply.
Please note: Only use 20-40 W/230 V type G9, T300°C
halogen bulbs.
The bulb used in the product is specifically designed
for domestic appliances and is not suitable for general
room lighting within the home (EC Regulation
244/2009).
Light bulbs are available from our After-Sales Service.
- If using halogen bulbs, do not handle them with
your bare hands as your fingerprints could cause
damage. Do not use the oven until the light cover has
been refitted.
TROUBLESHOOTING
Any problems that arise or faults that occur can often be resolved easily.
Before contacting the After-sales Service, check the following table to see whether you can resolve the
problem yourself.
If the problem persists, contact your nearest After-sales Service Centre.
Read the safety instructions carefully before carrying out any of the following work
PROBLEM POSSIBLE CAUSE REMEDY
The oven is not working.
Power cut.
Disconnection from the mains.
Malfunction.
Check for the presence of mains electrical
power and whether the oven is connected
to the electricity supply.
Turn o the oven and restart it to see if the
problem persists.
The oven is not heating up.
Function selected.
Select a dierent function. Turn o the oven
and restart it to see if the fault persists.
Door open. Close the door and see if the fault persists.
The time is flashing.
Power cut.
You need to reset the time: Follow the
instructions given in the “Using the
appliance for the rst time” section.
The display shows the letter “F”
followed by a number.
Fault.
Contact you nearest Client After-sales
Service Centre and state the number
following the letter “F”.
The door will not close properly.
The safety catches are in the wrong
position.
Make sure that the safety catches are
in the correct position by following the
instructions for removing and retting the
door in the “Maintenance” section.
Loading ...
Loading ...
Loading ...