Loading ...
Loading ...
Loading ...
19
EN
CLEANING
ACCESSORIES
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required operations
with the oven cold.
Disconnect the oven from the
power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
EXTERIOR SURFACES
Clean the surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with
a damp microfibre cloth.
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they are
still hot.
Food residues can be removed using a washing-up
brush or a sponge.
INTERIOR SURFACES
• After every use, start cooling down the oven and
then clean it while it is still a bit warm, removing
any deposits or stains caused by food residues. To
dry any condensation that has formed as a result of
cooking food with a high water content, cool the
oven completely and then wipe it with a cloth or
sponge.
• Clean the glass door with a suitable liquid detergent.
• The oven door can be removed to facilitate cleaning.
CLEANING THE CATALYTIC PANELS
This oven can be equipped with special catalytic
liners that facilitate cleaning of the cooking
compartment thanks to their special self-cleaning
coating, which is highly porous and able to absorb
grease and grime.
These panels are fitted to the shelf guides: When
repositioning and then refitting the shelf guides,
make sure that the hooks at the top are slotted into
the appropriate holes in the panels.
To make best use of the catalytic panels’ self-cleaning
properties, we recommend heating the oven to 200 °C
for around one hour using the “Convection Bake”
function. The oven must be empty during this time.
Then leave the oven to cool down before
removing any remaining food residues using
a non-abrasive sponge.
Please note: Using corrosive or abrasive cleaning agents, sti
brushes, pan scourers or oven sprays could damage the
catalytic surface and compromise its self-cleaning properties.
Please contact our After-sales Service if you require
replacement panels.
(ONLY IN SOME MODELS)
Loading ...
Loading ...
Loading ...