Loading ...
Loading ...
Loading ...
DESCRIPTION OF THE APPLIANCE
8
Drawer
Burner safety valve
Spark ignitor
(optional)
Because we contiunally strive to improve our products.
We may change our specifications and designes without prior notice.
9
INSTALLATION
This appliance must be installed by an authorised person in accordance with
this instruction manual, AS/NZS 5601.1-Gas installations (installation and
pipe sizing), local gas fitting regulations, local electrical regulations,
Building Code of Australia and any other government authority.
Overhead clearances-(Measurement A) Range
hoods and exhaust fans shall be installed in accordance
with the manufacturer’s
relevant instructions. However, in no case shall the
clearance between the highest part of the hob of the gas
cooking appliance and a range hood be less than 600
mm or, for an overhead exhaust fan, 750mm
Side clearances-(Measurements B,&C) Where B
any vertical combustible surface, or vertical combustible
surface. covered with toughened glass or sheet metal, is
measured from the periphery of the nearest burner to
less than 200mm, the surface shall be protected to a
height C of not less than 150 mm above the hob for the
full dimension (width or depth) of the cooking surface
area. Where the gas cooking appliance is fitted with a
splashback, protection of the rear wall is not required.
Additional requirements for freestanding and
elevated gas cooking appliances-(Measurements D
&E) .Where D, the distance from the periphery of the
nearest burner to a horizontal combustible surface is
than 200mm, then E shall be 10 mm or more, or less
horizontal surface shall be above the trivet.the
The cooker should stand on a hard,
even floor (do not put it on a base).
Before you start using the cooker, it
should be leveled, which is particularly
pan. To this purpose, adjustable feet
can be found upon removing the utility
important for fat distribution in a frying
drawer. The adjustment range is +/-5mm.
If the appliance is used for extended
periods, it may be necessary to open
a window in order to boost ventilation.
The kitchen where the appliance is to
be installed must be dry and well
ventilated.
The room should be equipped with a
ventilation system that pipes away
exhaust fumes created during
consist of a ventilation grid or hood.
combustion. This system should
Hoods should be installed according
to the manufacturer’s instructions.
The cooker should be placed so as
to ensure free access to all control
elements.
●
●
●
●
●
Control panel
Grate
Oven door handle
Medium burner
Large burner
A
Loading ...
Loading ...
Loading ...