Loading ...
Loading ...
Loading ...
Operation(Continued)
q.,
.m
o.1
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and bladerunning. STOPengine and blade.
Disconnectspark plug wire and secure away from spark
plug. Engineand components areHOT.Avoid serious
burns, allow sufficient time for all components to cool.
InstallingtheGrassBag
(Slide Closure Type)
1. Install the grass bag adapter. Referto the Section
entitled "Installing the Grass BagAdapter".
2. Install the grass bag bysliding the connector (A, Figure
14) over the adapterflange.
3. Attachthe grass bag hooks (B) overthe middle handle
cross bar.
Figure 14.Installing the grass bag
DumpingtheGrassBag
1. Graspthe bag connector and baghandle. Lift up on the
bag handle, removing it from the mower handle. Then
lift up on the bag connector, removing it from the
adapterflange.
2. Openthe bag by pulling the bag slider (A, Figure 15) off
of the Z-fold at the rear of the bag(B).
3. Toclose the bag,fold the rear of the bag into the former
Z-shape,keepingthe edgesaligned. Graspthe edgeof
the Z-fold, and while holding the slider, pull the Z-fold
fully into the slider.
NOTE.An illustration of theZ-Fold is attached to the bag.
Figure 15. Removingthe bag sfider
WARNING
GrassCatcherbags usedon SNAPPERproducts aremade
of woven fabric, and are subject to deterioration and wear
during normal usage. Checkcondition of bag before each
use. Immediately replaceworn or damagedcatcherbags
with only bags recommendedby SNAPPER.The grass
catcher is optional equipment on some models.
10 www.snapper.com
Loading ...
Loading ...
Loading ...