Loading ...
Loading ...
Loading ...
,
Before connecting garden hose to water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged•DO NOTrun pressurewasher if
inlet screenis damagedor missing.
4. Run water through garden hose for 30 seconds to flush
it of debris• Turn off water•
IMPORTANT:DO NOTsiphon standing water for the water
supply• UseONLY cold water (less than IO0°F).
5. Connect garden hose (not to exceed 50 feet in length) to
water inlet• Tighten by hand•
NOTICE
Using a One Way Valve (vacuum breaker or check valve) at
pump inlet can cause pump or inlet connector damage•
ThereMUSTbeat leastten feetof unrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchas a
vacuumbreakeror checkvalve•
Damageto equipmentresultingfrom failureto followthis
instructionwill void warranty•
WARHJHG
Risk of eye injury•
• _ ISpray can splash back or propel objects•
Alwayswearsafetygoggleswhen usingthis equipmentor in
vicinityof whereequipmentis in use.
Beforestartingthe pressurewasher,besureyouare wearing
adequatesafetygoggles•
NEVERsubstitutesafetyglassesfor safetygoggles•
6. Turn ON the water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities•
CheckJistBeforeStarting Engine
Reviewthe unit to ensure you have performed all of the
following:
1. Besure to read Safety Rulesand Operationsections
before using the cleaning system•
2. Makesure handle is in place and secure•
3. Checkthat oil has beenadded to proper level in engine
crankcase•
4. Add proper fuel to fuel tank•
5. Checkfor proper hose connections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose•
6. Provide proper water supply (not to exceedIO0°F).
10
Loading ...
Loading ...
Loading ...