Loading ...
Loading ...
Loading ...
SHAVE PLATE AND SKID SHOES
Theshave plateand skid shoes on the bottomof the snowthrowerare
subjectto wear.Theyshouldbe checkedperiodicallyand replaced
whennecessary.
Skid Shoes
NOTE:The skid shoes on this machinehavetwowearedges.When
onesidewears out, theycan be rotated180° to usethe otheredge.
1. Removethe six carriagebolts and hexnutsthatsecurethe two
skidshoesto the sidesof the augerhousing.Referto Figure18.
2. Positionthe newskid shoesand securewith the carriagebolts
andhex nuts.Makecertainthe skid shoesare adjustedto be
level.
Shave Plate
1. Removethe hexnuts and carriagebolts that securethe shave
plateto the bottomof the housing.
2. Removethe rearmosthexnut andcarriageboltsecuringthe back
of eachskidshoeto the sides of the housing.Loosenthefour
remaininghexnuts securingthe skidshoes.
3. Slide theshaveplateoutof the off-setslot at the bottomof the
housing,andfrombetweentheskid shoes and side panelsof the
housing.
4. With the mountingholestowardthe back,slide the newshave
plateintopositionandsecurewith thefastenersremoved
previously.
ADJUSTMENTS
Shift Rod
If the fullrangeof speeds(forwardand reverse)cannot be achieved,
referto the figureto the leftandadjustthe shift rodas follows:
1. Lookingunderneaththe handle panel,notewhich of the three
holesin the shift leverthe ferruleis insertedinto.Also notethe
directionof insertion.Thenremovethe internalcotterpin andflat
washerfromthe ferruleandwithdrawtheferrulefromthe shift
lever.SeeFigure19.
2. Placeshift leverin sixth (6)positionor fastestforwardspeed.
3. Pushshift rod and shiftarm assemblydownsharplyas far as it
willgo to put the driveintothe fastestforwardposition.
4. As necessary,rotatethe ferruleup or downthe shift rod untilthe
ferrulelinesupwiththe hole from which it wasearlierremoved.
SeeFigure19.
5. Fromthe directionnotedearlier,insertthe ferruleintothe proper
hole.
6. Reinstallthe washerandthe internalcotterpin.
f m
Figure18
\
\\
\ \
Chute Control
Thedistancesnowis throwncan beadjustedby adjustingthe angleof
the chuteassembly.Referto theOperationsectionfor instructions.
Theremotechute controlcableshavebeenpre-adjustedat the factory.
Movethe remotechuteleveron thecontrolpanel forwardto pivotthe
upperchutedown;movethe leverrearwardto pivotthe upperchute
up.
18
Loading ...
Loading ...
Loading ...