Loading ...
Loading ...
Loading ...
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUR KEEP
HANDS AWAY FROM BLADE - Blade
moves momantadly after the trigger ls
released. Do not attemptto clear away
cutmaterialwhen thebladeisinmotion.
Make sure the switchisinthe OFFposi-
tion, the spark plug wire is discon-
nected, and the blade has stopped
movingbefore removingjammed mate-
rial from the cuttingblade. Do notgrab
or hold the unitby the cuttingblade.
Blades move
momentarily
after the
ed.triggeris
Allow blades tostop
beforeremoving
them fromthecut.
WARNING: Inspect the area be-
fore startingthe unit. Remove all de-
bris and hard objectssuch as rocks,
glass, wire, etc. that can ricochet,be
thrown,orotherwise cause injuryor
damage duringoperation.
• Do notuse a cuttingblade that is
bent, warped, cracked, brokenor
damaged in any other way. Have
worn or damaged parts replaced by
your Sears Service Center.
• Always keep unit in front of your
body. Keep all parts of your body
away from the cutting blade.
• Keep the cutting blade and air vents
clear of debris.
POLEPRUNERSAFETY
_' WARNING: The reciprocating
blade/rotating chain can cause severe
injury. Inspect the unit before use. Do
not operate unit with a bent, cracked
or dull blade or dull chain. Keep away
from the blade/chain.
WARNING: The reciprocating
blade/rotating chain is sharp. Do not
touch. To prevent serious injury, al-
ways stop engine and ensure blade/
chain has stopped moving, disconnect
spark plug, and wear gloves when
changing or handling the blade or
chain.
WARNING: A coasting blade/ro-
tating chain can cause injury while it
continues to move after the engine is
stopped. Maintain proper control of the
unit until the blade/chain has completely
stopped moving. Keep hands, face and
feet at a distance from all moving parts.
Do not attempt to touch or stop the
blade or chain when it is moving.
_WARNING: Falling objectscan
cause severe head injury. Wear head
protectionwhen operating this unit
with a pole pruner attachment.
7
_ WARNING: To preventserious
injury, do not use more than one boom
extensionwith a pole pruner attach-
ment.
WARNING: Keep the pruner
away from power lines or electrical
wires.
• Only use for pruning limbs or
branches up to 4 inches in diameter.
• Do not operate the unit faster than
the speed needed to prune. Do not
run the unit at high speed when not
pruning.
• Always stop the unit when work is
delayed or when walking from one
cutting location to another.
• If you strike or become entangled
with a foreign object, stop the engine
immediately and check for damage.
Have any damage repaired by a
Sears Service Center before at-
tempting further operations. Discard
blades that are bent, warped,
cracked or broken.
• Stop the unit immediately if you feel
excessive vibration. Vibration is a
sign of trouble. Inspect thoroughly
for loose nuts, bolts or damage be-
fore continuing. Contact Sears Ser-
vice for repair or replacement of af-
fected parts as necessary.
Loading ...
Loading ...
Loading ...