Loading ...
TABLE OF CONTENTS
Introduction 2-7
Safety symbol and signal word review ..................... 2
Preparingyour garagedoor ............................. 3
Tools needed......................................... 3
Planning 4-5
Carton inventory ...................................... 6
Hardware inventory.................................... 7
Assembly 8-11
Assemble the rail and install the trolley ..................... 8
Fastenthe rail to the motor unit and
install the idler pulley .................................. 9
Install the chain/cable ................................. 10
Tighten the chain .................................... 11
Installation 11-26
Installation safety instructions .......................... 11
Determine the headerbracket location .................... 12
Install the header bracket .............................. 13
Attach the rail to the headerbracket ...................... 14
Position the opener................................... 15
Hang the opener ..................................... 16
Install the door control ................................ 17
Install the lights ..................................... 18
Attach the emergency releaseropeand handle.............. 18
Electrical requirements ................................ 19
Install The Protector System®........................ 20-22
Fastenthe door bracket............................. 23-24
Connect the door arm to the trolley ................... 25-26
Adjustment 27-29
Adjust the travel limits ................................ 27
Adjust the force...................................... 28
Test the safety reversal system.......................... 29
Test The Protector System® ............................ 29
Operation 30-34
Operationsafety instructions ........................... 30
Usingyour garage door opener ......................... 30
Usingthe wall-mounted door control ..................... 31
To open the door manually............................. 31
Careof your garagedoor opener ........................ 32
Havinga problem? ................................... 33
Diagnosticchart ..................................... 34
Programming 35-36
To add or reprogram a hand-held remote control ............ 35
To erase all codes.................................... 35
3-Function Remotes.................................. 35
To add, reprogram or change a KeylessEntry PIN ........... 36
Repair Parts 37-38
Rail assembly parts................................... 37
Installation parts ..................................... 37
Motor unit assembly parts ............................. 38
Accessories 39
Warranty
Repair Partsand Service
39
Back cover
INTRODUCTION
SafetySymboland Signal WordReview
This garage door opener has beendesigned and tested to offer safe service provided it is installed, operated, maintained and tested in
strict accordancewith the instructions and warnings contained in this manual.
Mechanical
Electrical
When you seethese Safety Symbols and Signal Words on the
following pages,they will alert you to the possibility of serious
injury or deathif you do not comply with the warnings that
accompanythem. The hazard may come from something
mechanicalor from electric shock. Readthe warnings carefully.
When you seethis SignalWord on the following pages, it will
alert you to the possibility of damageto your garagedoor and/or
the garage door opener if you do not comply with the cautionary
statementsthat accompany it. Readthem carefully.
Loading ...
Loading ...
Loading ...