Loading ...
Loading ...
Loading ...
IMPORTANT NOTE TO INSTALLER
Please read the following instructions carefully before installing the washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation flow chart
Selecting a _ Removingthe shipping _ Connecting the water
location bolts (*Drumonly) and the drain
T
Please
check again
before
steps.
[
Yes
i i iii i i i i _
Adjusting the _ poweringyour washing
levellingfeet machine
Does
yourwashei
haveexcessvibration
ornoise?
Running a Calibration mode
(Re!ert0 the following _ Finish the
installation
No description)
STEP 1
Removing the Shipping Bolts
Before using your washer, you must remove all shipping bolts from the
back of the unit.
1. Loosen all the bolts with the supplied wrench.
2. Slide the bolt and spacer up and remove the bolt with the spacer
through the hole in the rear wall of your washer. Repeat for each
bolt.
3. Cover the holes with the supplied Bolt Hole Covers (See page 13).
4. Keep the shipping bolts and spacers for future use.
STEP 2
Selecting a Location
Before you your washer, sure
install make the location:
Has a hard, level surface
Is away from direct sunlight
Has adequate ventilation
Will not freeze (tempuratures are never below 32 °F or 0 °C).
Is away from heat sources such as oil or gas
Has enough room for the power cord.
Doesn't have any carpeting that will obstruct ventilation openings.
Hnstaling your washer 17
\VF395BTPA 03145B 06 ENindd 17 2014-2 24 11:52:31
Loading ...
Loading ...
Loading ...