Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
AS YOU COMPLETE
REGULAR SERVICE ICE DATES!
i
Check Brake Operation V' tl/
Check Tire Pressure V'
Check Operator Presence and
Interlock Systems I_
R Check for Loose Fasteners V' V'7 lkf ; ,
AC Sharpen/Replace Mower Blades V'4
T Lubrication Chart I_ I/r
0 Check Battery Level 1_6
R CkDan Battery and Terminals tk/ I1_
Check Transaxle Cooling Ik/
Adjust Blade BaR(s) Tension Ik/s
Adjust Motion Drive Belt(s) Tension _s
i
Chec_Er_ o,r_eve_ t/ V'
Change Engine Oil _,3
E Clean Air Filter V'= t
N Clean Air Screen VP=
G Inspect MuffledSpark Arrester V e
Replace Oil Filter (If equipped) l_t,2
E Clean Engine Cooling Fins re2
Replace Spark Plug V' I_
Replace Air Filter Paper Cartridge V'z
Replace Fuel Filter If
1 - Change more often when operating under • heavy load or in hlgh ambierff temperatures. 5 - If equipped with adjustable system.
2 - Service more often when operating in dbly or dusty conditiorm.
3 - ff equipped with oil _ter, change oil evwy 50 hours.
4 - Replaco Idade= more often w'mm mowing In ,,andy =oil.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negliger_ce. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual. Some
adjustments will need to be made periodi-
cally to propedy maintain your tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Ch___v..koperator presence and intedock
-'sys_{_'rms'f_rprope r operation.
• Check for loose fasteners.
6 - Not required if equipped with mainten-nce-lroe battery.
7 - Tighten kont axle pivot bolt to 35 ft.-Ibe, n_udmum.
Do not ovo_ghten.
LUBRICATION CHART
@
I
!
I
0 Attachmenl_ ;
Clutch _ , @ Gear
i I
Pivot(s) I T-" I Shift
; I I .0
....... Pivots
O SAE 30 or 10w30 Motor OIL
O General PurposeGrease
O Referto Maintenance "Engine" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bear-ings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type lubd-
cant sparingly.
18
Loading ...
Loading ...
Loading ...