Loading ...
Loading ...
Loading ...
7
W415-1016 / B / 03.13.12
2.3 GENERAL INFORMATION
* When the appliance is installed at elevations above 2,000ft, and in the absence of specifi c recommendations
from the local authority having jurisdiction, the certifi ed high altitude input rating shall be reduced at the rate of
4% for each additional 1,000ft.
This appliance is suitable for mobile home installation. The natural gas model can only be installed in a mobile
home that is permanently positioned on its site and fueled with natural gas. This appliance may be installed in
an aftermarket permanently located, manufactured (mobile) home, where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not
convertible for use with other gases.
The appliance is equipped with two catalytic tiles which are designed to cilter out harmful gases and limit
carbon monoxide output. It is likely that with the appliance in operation, the catalytic tiles will actually scrub
the carbone monoxide normally found in the room and reduce it to a lower level. The tiles must not be altered
or removed. Do not operate the appliances when using products such as paint, paint thinner, adhesives, etc.
These products will permanently affect the catalytic tiles’ ability to scrub the air.
Expansion / contraction noises during heating up and cooling down cycles are normal and are to be expected.
RATES AND EFFICIENCIES
NATURAL GAS PROPANE GAS
Altitude 0 - 2,000* 0 - 2,000*
Maximum Input 20,000 BTU/hr 20,000 BTU/hr
Effi ciency 99.9% 99.9%
Minimum Inlet Gas Supply Pressure 4.5” Water Column 11” Water Column
Maximum Inlet Gas Supply Pressure 7” Water Column 13” Water Column
Manifold Pressure Under Flow Conditions 3.5” Water Column 10” Water Column
FOR YOUR SATISFACTION, THIS APPLIANCE HAS BEEN TEST-FIRED TO ASSURE ITS OPERATION
AND QUALITY!
Loading ...
Loading ...
Loading ...