Loading ...
Loading ...
Loading ...
16
W415-1016 / B / 03.13.12
74.1A
Evenly spread the glass media onto the media tray, covering the burner tube and following the natural shape o
f
the media tray.
In some installations, glass media over the burner tube may cause a “Puffi ng” sound. If this sound is
excessive, simply push the media away from the burner ports.
NOTE: The distribution of glass media over the burner tube will infl uence the fl ame height. When the
fl ames impinge on the glass, the glass may discolour slightly and the edges may soften.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing over the burner.
CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
THAT IT IS DRY.
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
DEALER / DISTRIBUTOR.
GLASS MEDIA OVER THE BURNER MUST NOT BE MORE THAN ONE LAYER HIGH. MORE THAN ONE LAYER
OVER THE BURNER WILL CAUSE FLAME LIFTING AND SOOTING PROBLEMS.
!
WARNING
4.4 GLASS MEDIA
SLOTS
HOOKS
A. Lift the surround
and engage
the hooks into
the slots on the
appliance, then
let it slide down
into position.
NOTE: When installing
the surround ensure no
wires are pinched or
exposed.
4.5 SURROUND INSTALLATION / REMOVAL
Loading ...
Loading ...
Loading ...