Loading ...
Loading ...
Loading ...
15
W415-1016 / B / 03.13.12
!
WARNING
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
75.1
A. Remove the surround. (see “SURROUND
INSTALLATION/REMOVAL” section.)
B. Remove the 3 screws that secure the door.
C. Lift the door up and off.
4.2 DOOR REMOVAL / INSTALLATION
A. Remove the surround and door if installed. (See “SURROUND INSTALLATION / REMOVAL” and
“DOOR REMOVAL / INSTALLATION” sections.)
B. Centre the rear brick panel against the back of the fi rebox with the bottom edge resting on the back
fl ange.
C. Place the top brick panel against the top of the rear brick panel. Align the holes in the brick retainer
with the holes in the fi rebox and secure using the 4 screws provided.
REAR BRICK
PA
N
EL
T
O
P
BRI
CK
P
ANEL
4.3 BRICK PANEL INSTALLATION
Loading ...
Loading ...
Loading ...