Loading ...
Loading ...
Loading ...
38
The hob must be ventilated properly. The air inlet (D) and outlet (E) must never
be blocked or covered. Always keep the appliance in proper condition. The top
closing edge of the cabinet (X) must not be flush with the installation opening
(1). Install the closing edge in offset positioning (2) or bevel the closing edge (3).
A(mm)
B(mm)
C(mm)
D
E
760
50 min.
30 min.
Air inlet
Air outlet 10 mm
WARNING! Min. safety distance between hob and a cupboard above = 76
cm.
Ensure before the installation
The worktop must be rectangular and plane and made of heat-resisting material.
Structural elements should not interfere with the installation area.
The installation must meet the safety requirements as well as the legal rules and
regulations.
The wall sat the hob should be covered with heat-resistant material, e.g. ceramic
tiles.
The power cable must not come into contact with cabinet doors or drawers.
The appliance must be supplied with an adequate flow of fresh air from outside
the cabinet to the base of the hob.
Loading ...
Loading ...
Loading ...