Loading ...
Loading ...
Loading ...
4-WireCord Connections
Green Ground Green PowerCord
Screw Ground Wire
Red ..__ ___
Brass Terminal
Terminal Block
/
! Block
Tighten Nut to
These Threads
f
Power Cord
Strain Relief
Mounting Bracket
1. Remove the screws securing the terminal block access cover and the strain
relief mounting bracket located on the back of the dryer upper corner.
2. Install a UL approved strain relief into the power cord entry hole of the
mounting bracket. Finger tighten the nut only at this time.
3. Remove the green neutral ground wire from the green ground screw located
above the terminal block.
Typical Conductor
Receptacle
11
Typical 4
Conductor Cord
J
Black240V
_ hite Neutral
Red240V
Green Ground
Loading ...
Loading ...
Loading ...