Loading ...
Loading ...
Loading ...
Filling/Refilling
You have two options for filling your humidifier’s
Water Tank: under the faucet at the sink, or
with a pitcher of water at the humidifier.
1. If filling at the sink, turn the humidifier off, then
open Tank lid to reveal the handle, remove Tank
from Base, carry to sink and fill.
OR
If filling at the humidifier, ensure Tank is securely
seated on Base. Open Tank lid and fill using a
water pitcher.
NOTE: Fill Tank with cool water. DO NOT fill with
warm or hot water. DO NOT ADD ESSENTIAL OILS,
MEDICATIONS, OR INHALANT LIQUIDS, such as
Vicks VapoSteam, to the Tank. Doing so could cause
damage to the humidifier and void the warranty.
2. Close the Tank lid.
3. If filled at the sink, carry the full Tank back using
two hands and place back in the Water Reservoir
on the Base. For proper placement, line up the
chimney and nozzle to the HONEYWELL logo.
NOTE: When taking your Tank to and from the sink, carry
the Tank using two hands. Manufacturer will not accept
responsibility for property damage caused by water spillage.
Water Quality and Your Humidifier
High mineral content in your water, also known as
“hard water,” may cause a white mineral residue
to accumulate on surfaces in the room near the
humidifier. This mineral residue is commonly
referred to as “White Dust.” The higher the mineral
content or hardness of your water, the greater the
potential that you may have white dust. “White Dust”
is not a result of a defect or flaw in the humidifier. It
is a result of the amount of minerals suspended in
the water you are using. If you live in a hard water
area, use distilled water to minimize the production
of white dust.
CAUTION: USE CARE WHEN HANDLING WATER
TANK TO AVOID UNNECESSARY IMPACT. BANGING
OR DROPPING THE WATER TANK COULD RESULT IN
DAMAGE TO THE TANK THAT WILL CAUSE LEAKING.
06
Loading ...
Loading ...
Loading ...