Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 307
NOTE:
If your vehicle is equipped with an air suspension
system, there is a feature which allows the auto-
matic leveling to be disabled before changing a
tire. This feature can be activated through the
Uconnect system Ú page 136.
NOTE:
Before changing a tire or using the jack please
disable the hands free lift gate, This feature can be
disabled through the Uconnect system
Ú page 215.
PREPARATIONS FOR JACKING
1. Park the vehicle on a firm, level surface as far
from the edge of the roadway as possible.
Avoid icy or slippery areas.
2. Turn on the Hazard Warning Flashers.
3. Apply the parking brake.
4. Place the gear selector into PARK (P).
5. Turn OFF the ignition.
6. Block both front and rear of the wheel
diagonally opposite of the jacking position.
For example, if changing the driver’s front tire,
block the passenger’s rear wheel.
Wheel Blocked Example
NOTE:
Passengers should not remain in the vehicle when
the vehicle is being raised or lifted.
JACK LOCATION
The scissor-type jack and tire changing tools are
located in the rear cargo area, under the load floor.
NOTE:
Depending on the vehicle’s trim level, the jacking
tool locations vary from second and third row
seating.
1. Locate and lift up on the load floor handle.
Load Floor Handle
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
7
22_WL_OM_EN_USC_t.book Page 307
Loading ...
Loading ...
Loading ...