Loading ...
Loading ...
Loading ...
Making calls
1 Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press MTALK/ZN to make the call.
R To make the call using the
speakerphone, press and hold MTALK/
ZN for a few seconds.
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R While talking, you can switch between the
receiver and the speakerphone by pressing
MTALK/ZN.
R In step 1, you can store the dialed phone
number to the phonebook by pressing and
holding MFN W for a few seconds.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (48 digits max. each).
1 MEN REDIAL
2 MbN: Select the desired entry.
3 Press MTALK/ZN.
Erasing a number in the redial list
1 MEN REDIAL
2 MbN: Select the desired entry. a
MERASEN
3 MbN: “Yes” a MSELECTN a MOFFN
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Note for handset:
R If the receiver volume is set to level 5
(max.), it will be changed to level 4 in the
next call.
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 33).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MDN (Pause)
2 Dial the phone number. a MTALK/ZN
Note:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
1 When the unit rings, lift the handset.
n To answer using the receiver:
Press MTALK/ZN.
n To answer using the speakerphone:
Press and hold MTALK/ZN for a few
seconds.
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key (except 0 key).
Auto talk: You can answer calls simply by
lifting the handset (page 40).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M N (left
soft key).
Adjusting the ringer volume
Handset
Press MDN or MCN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press MCN repeatedly.
Base unit
Press MjN or MkN repeatedly to select the
desired volume.
For assistance, please visit http://shop.panasonic.com/support
21
Making/Answering Calls
Loading ...
Loading ...
Loading ...