Loading ...
Loading ...
Loading ...
OPERATmON AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
Your treadmHUfeatures a waUkingbeUtcoated with high-
performance Uubrbant, IMPORTANT: Never apply sil-
icone spray or other substances to the waJking
beJt or the walking platform. Such substances will
deteriorate the walking belt and cause excessive
wear.
HOW TO PLUG IN THE POWER CORD
DANG ER: Improperconnection
of the equipment-grounding conductor can
resuJt in an increased risk of eJectric shock.
Check with a qualified eJectrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productJif it wHJ
not fit the outlet, have a proper ouUet
installed by a quaJified eJectrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power,
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off, To decrease the possibility of
your treadmill being damaged, aJways use a surge
suppressor with your treadmill (see drawing 1 at
the right}. To purchase a surge suppressor, see
your JocaJSears store or call 1-800-366-7278 and
order part number 146148, or see your iota1 eJec-
tronics store.
Use onJy a singJe-ouflet surge suppressor that is
UL 1449 Jisted as a transient voJtage surge sup-
pressor (TVSS}. The surge suppressor must have a
UL suppressed vottage rating of 400 volts or Jess
and a minimum surge dissipation of 450 jouJes.
The surge suppressor must be electrically rated for
120 volts AC and 15 arnps. There must be a moni-
toring light on the surge suppressor to indicate
whether it is functioning properly. Failure to use a
propedy functioning surge suppressor could resuJt
in damage to the controJ system of the treadmill. If
the control system is damaged, the walking belt
may change speed, acceJerate, or stop une×pect-
edty, which may result in a fail and serious injury.
This product must be grounded, if it should maffunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of ebc°
tric shock, This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug, Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with aH JocaJ codes and ordinances.
Important: The treadmill is not compatible with
GFCl-equipped outJets.
This product is for use on a nominal 120°volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below, A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available,
I
SpGrounded Outlet Box
_'-I -- Surge Suppressor
_< "-. Grounding Pin
Grounding Pin
_rounded Outlet Grounding Hug
2
_rounded Outlet Box
Adapter
Metal Screw_ . _Surge Suppressor
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician,
The greemcolored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover,
Whenever the adapter is used it must be held in place
by a metal screw, Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outJet box cover is
grounded before using an adapter.
Loading ...
Loading ...
Loading ...