Loading ...
Loading ...
Loading ...
Locate the Reed Switch (63) and the Magnet (46) on
the bft side of the Pulley (47), Turn the Pulley until
the Magnet is aligned with the Reed Switch, Make
sure that the gap between the Magnet and the
Reed Switch is about 1/8". ff necessary, bosen the
Screw (7), move the Reed Switch slightly, and then
retighten the Screw, Reattach the Hood, and run the
treadmHUfor a few minutes to check for a correct
speed reading,
Top
View
1/8"-
7J-
47
J
PROBLEM: The waJking belt slows when walked on
SOLUTION: a, Use only a single-outlet surge suppressor that meets all of the specifications described on page 8,
b,
if the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be°
come damaged, Remove the key and UNPLUG THE
POWER CORD, Using the hex key, turn both rear
roller bolts counterclockwise, 1/4 of a turn, When the
walking belt is properly tightened, you should be able
to lift each edge of the walking belt 2 to 3 inches off
the walking platform, Be careful to keep the walking
belt centered, Then, plug in the power cord, insert the
key, and run the treadmill for a few minutes, Repeat
until the walking belt is properly tightened,
Rear Roller Bolts
c, if the walking belt still slows when walked on, please call toll-free 1-800°4°MY-HOME ®(1o800o
469°4663),
PROBLEM: The waJking belt is off-center or sJips when walked on
SOLUTION: a,
If the walking beJt is off-center, first remove the key
and UNPLUG THE POWER CORD, If the waJking
beJt has shifted to the teft, use the hex key to turn
the left rear roller bolt clockwise 1/2 of a turn; if the
waJking beJt has shifted to the right, turn the bolt
counterclockwise 1/2 of a turn, Be careful not to over°
tighten the walking belt, Then, plug in the power cord,
insert the key, and run the treadmill for a few minutes,
Repeat until the walking belt is centered,
b,
If the walking beJt sJips when waJked on, first re-
move the key and UNPLUG THE POWER CORD,
Using the hex key, turn both rear roller bolts clock°
wise, 1/4 of a turn, When the walking belt is correctly
tightened, you should be able to lift each side of the
walking belt 2 to 3 inches off the walking platform, Be
careful to keep the walking belt centered, Then, plug
in the power cord, insert the key, and carefully walk
on the treadmill for a few minutes, Repeat until the
walking belt is properly tightened,
19
Loading ...
Loading ...
Loading ...