Loading ...
Loading ...
Loading ...
2
THE LIGHT IS NOT WORKING
1. The LED light may be damaged.
2. The control system has disabled the lights
due to the door being kept
open too long.
1. Refer to replace LED lights in cleaning and
care chapter.
2. Close and reopen the door to reactivate the
lights.
If the appliance shows a malfunction not noted on the schedule above or if you have checked
all items on the above schedule but the problem still exists , please contact the shop you
purchased the appliance at.
THE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
AND DO NOT INDICATE A MALFUNCTION.
※The refrigerant generates a sound similar to flowing water.
※Sometimes you may hear a sound which is generated by the injection process of the cooling
circuit.
※The sides of the appliance may get warm while the appliance is running.
DISTINCT NOISE
When you operate the appliance for the first time or the temperature falls below a certain level,
the appliance will operate with high power to reach the preset temperature.
CONDENSED WATER IN / ON THE APPLIANCE
It may be generated inside or outside the appliance by high humidity or very warm ambient
temperatures.
CLICKING
You will hear the compressor click if it is activated or deactivated.
HUM
It is caused by the compressor while running.
KNOCKING / SNAPPING
It may be generated by sequential expansion and shrinkage of the components of the cooling
system. It is caused by variation of temperature before and after the compressor is activated or
deactivated
Decommissioning
DECOMMISSIONING, TEMPORARILY:
IF THE APPLIANCE IS NOT USED FOR A LONGER PERIOD OF TIME:
1. Disconnect the appliance from the mains. To disconnect the appliance from the mains, you
must unplug the appliance or use a cut-off device.
2. Remove all food stored in the appliance.
3. Dry the inside of the appliance with a cloth and leave the door open for a few days.
WHILE AWAY ON AN AVERAGE VACATION / HOLIDAY (14-21 DAYS):
Loading ...
Loading ...
Loading ...