CM61081-S User Manual

Loading ...

11 - ENG

G. Handle

H. Frame

I. Pump Outlet

J. Pump Inlet

K. Quick Connect Nozzles

L. Dial-N-Wash

Adjustable Pressure Regulator (if equipped,

not shown)

Use the Dial-N-Wash to increase and decrease the pressure. Refer to the Dial-

N-Wash Adjustmentparagraph.

BASIC ELEMENTS OF AN ENGINE

Refer to the Engine Owner’s Manual for location and operation of enginecontrols.

Choke Control: Opens and closes carburetor chokevalve.

Starter Grip: Pulling starter grip operates recoil starter to crankengine.

Engine Switch: Enables and disables ignitionsystem.

ASSEMBLY INSTRUCTIONS (FIG. 2 – 4)

1. Locate and remove all loose parts from thecarton.

2. Cut four corners of the carton from top to bottom and lay the panelsflat.

Place handle (G) onto frame (H),

depress the snap buttons, and

slide the handle assembly onto the

frame until snap buttons snap

intoplace.

NOTICE: Risk of personal injury.

Avoid placing hands between handle

and frame when assembling to

preventpinching.

4. Remove the colored quick-connect nozzles (K) from the plastic bag and insert

them into correct grommet on the nozzle holder. Nozzles are color coded to

match colored nozzles on label (Q).

5. Connect wand (E) to gun (D). Tightensecurely.

6. Attach high pressure hose (C) to gun (D). Tightense cure ly.

NOTE: The pump on this unit is maintenance free and requires no oil. If

there is a problem with the pump, contact our Customer Service Group on

www.simpsoncleaning.com as soon aspossible.

NOTICE: The engine is shipped without oil. Before starting engine, add the oil

provided. Damage to the engine will occur if the engine is run without oil, this

damage will not be covered underwarranty.

Loading ...

User Manual - Page 11