Loading ...
Loading ...
Loading ...
14
ASSEMBLY
otherwise contaminated oils. Damage may occur to the bar or chain. It is normal for oil to seep
from the saw when not in use. To prevent seepage, empty the oil tank after each use, then run
for one minute. When storing the unit for a long period of time (three months or longer), be sure
the chain is lightly lubricated; this will prevent rust on the chain and bar sprocket.
WARNING
To preserve natural resources, please recycle or dispose of oil properly. Consult your local waste
authority for information regarding available recycling and/disposal options.
I
C
C
I
R
Oil Reservoir
Cap
Quick View
Oil Indicator
FIG.3
POLE SAW
FITTING THE SAW HEAD (FIG.4)
The saw head can be tted directly to the handle in order to achieve standard reach.
• Align the groove on the outside of the coupling end of the handle (4) with the tongue on the
inside of the coupling end of the saw head (5). Push the saw head (5) onto the handle (4).
• Slide the collar (6) upwards and rotate it counterclockwise until it is fully tightened.
EXTENDING THE SAW HEAD (FIG.5)
The maximum reach can be achieved by tting the extension tube (9) between the saw head (8)
and the handle (7).
• Align the groove on the outside of the coupling end of the handle (7) with the tongue on the
inside of the coupling end of the extension tube (9).
• Push the extension tube (9) onto the handle (7).
• Slide the collar upwards and rotate it counterclockwise until it is fully tightened.
FIG.4
5
6
4
Loading ...
Loading ...
Loading ...