Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
1. Align the canopy (E) over the loose mounting bracket
screws (O) preassembled on mounting bracket
(D). Place the keyholes of the canopy (E) onto the
mounting bracket screws (O) and rotate the canopy (E)
clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (O) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (O) securely.
Note: Closemount installation will not have the
downrod (A), yoke cover (G) or canopy cover (F).
3. Partially insert the blade screws (BB) along with a blade
washer (CC) and rubber washer (GG) through the blade
(K) and into the blade arm (J). Tighten each blade screw
(BB) with a Phillips screwdriver (not included), starting
with the one in the middle. Repeat this step for the
remaining blades (K) and blade arms (J).
BB
Blade Screw x 15
Blade Washer x 15
Rubber
Washer
x 15
1
2
3
O
D
E
O
E
BB
GG
CC
K
J
CC
GG
Hardware Used
Loading ...
Loading ...
Loading ...