Loading ...
Loading ...
Loading ...
Read these instructionsand this manual
in its entirety beforeyou attempt to
assemble or operate your new lawn
mowsr.
IMPORTANT: This lawn mower is shipped
WITHOUT OIL OR GASOLINE inthe
engine.
Your new lawn mower has been as-
sembled at the factory withthe exception
of those parts left unassembled for
shippingpurposes. To ensure safe and
proper operation of your lawn mower, all
parts and hardware you assemble must
be tightenedsecurely. Use the correct
tools as necessary to ensure proper
tightness. All parts such as nuts, wash-
ers. bolts,etc., necessary to complete the
assembly have been placed in the parts
bag.
TO REMOVE LAWN MOWER FROM
CARTON
1. Remove loose parts included with
mower.
2. Cut down two end comers of carton
and lay end panel down flat.
3. Remove all packing materials except
padding between upper and lower
handle and padding holding operator
presence control barto upper handle.
4. Roll lawn mower out of carton and
check carton thoroughlyfor additional
loose parts.
HOWTO SET UPYOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so
as not to pinch or damage controlcables.
1. Raise handles until lower handle
section locks into place in mowing
position.
2. Remove protective padding, raise
upper handle section into place on
lower handle and tighten both handle
knobs.
3. Remove handle padding holding
operator presence control bar to upper
handte.
Your lawn mower handle can be adjusted
for your mowing comfort. Refer to
"ADJUST HANDLE" in the Service and
Adjustments section of this manual.
control bar
position
Lower handle
TO INSTALL A'rrACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert mower
to bagging, see "TO CONVERT MOWER'
in the Operation section of this manual.
Loading ...
Loading ...
Loading ...