Loading ...
Loading ...
Loading ...
7-
NZ AU
18
Daily use
1. At programme cycle end END is displayed.
2.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4.
5. Unplug the power cord.
6. Open the door to prevent formation of moisture and odours. Let it open while not used.
7.13 Activate or deactivate the sounds
The sounds and signals can be activate if necessary:
1. Switch on the appliance.
2. Select the
ces 3
tuoba
rof emit emas eht ta nottub ”
Spin Speed
“ dna nottub“ Auto Dose“ eht hcuoT .3
onds. “bEEP ON” will be displayed and the buzzer will be activated.
For deactivating the buzzer touch these two buttons at the same time again. “bEEP
OFF ”
will
be displayed.
To interrupt a running programme press gently “Start/Pause“. The LED above the button
is flashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
1. Touch ”Start/Pause” button to interrupt the running programme.
2.
3.
4.
After closing the programm to restart the appliance,select a new programme and
7.12 After washing
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only
possible to open the door at the end of the programme or after the programme was
cancelled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not
possible to open the door; Lock
is displayed.
Note: Standby-mode / energy-saving mode
7.10 Start wash programme
Touch “Start/Pause“ button (Fig. 7-8) to start. The LED of the ”Start/
Pause“ button stops flashing and lights up continuously.
Appliance operates according to present settings.
Changes are only possible by cancelling the programme.
7.11 Interrupt / cancel wash programme
7-8
Power
Touch
tceles
dna nipS emmargorp
nur
,ecnailppa eht no nrut ot nottub "rewoP " eht hcuoT
.retaw eht niard ot ),ffo era sthgil deeps( "deepS
on "
Express 15
programme.
start it.
▶
▶
The appliance will go into stand-by mode after 2 minutes of inactivity. The display turns
off to save energy. Resume operation by pressing the power button to turn product on.
Loading ...
Loading ...
Loading ...