ASSEMBLY
1. Place the bottom tier onto the pedestal, twist to lock them together.
2. Place the electric submersible pump in the bottom tier and run the power
cord through the built-in pipe and out the bottom of the pedestal.
3. Place the column on the bottom tier, twist to lock them together.
4. Place the third tier on the column, twist to lock them together.
5. Run the built-in water tube from the topper through the second tier, twist
to lock the topper onto the second tier.
6. Run the water tube from Step 5 through the third tier, twist to lock the top
assembly to the third tier.
7. Connect the water tube to the pump and install the pump access cover.
8. Fill the bottom tier with enough water to fully submerge the pump.
Note: additional water will need to be added once the pump circulates
water into the upper tiers.
9. Plug the power cord into an electrical outlet.
Pineapple Topper 1
Second Tier 1
Third Tier 1
Column 1
Bottom Tier 1
Pedestal 1
Electric Submersible Pump 1
Pump Access Cover 1
4
-
TIER PINEAPPLE OUTDOOR WATER FOUNTAIN
FC-73650
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for reference and warranty.
NOTE: The water tube is built into the
topper. Gently and carefully uncoil the
water tube from inside the topper, ensuring
the built-in water tube remains intact with
the topper. Do not separate the water tube
from the topper.
IMPORTANT INFORMATION
USE & CARE
• For outdoor use only. Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn out the motor.
Water will need to be added more often when temperatures are higher and/or the air is dry.
• Only use water in this fountain; distilled water will help prevent mineral buildup but is not required, tap water is okay to use.
• Periodically change the water to keep the water, fountain and pump clean. Remove scale and build-up regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything abrasive to scrub the fountain.
DO NOT use a pressure washer.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form will crack the fountain.
TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water if necessary.
• Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
• Check the pump and tubing for obstructions.
• Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
• If water is not flowing within several moments of the fountain being plugged in, unplug the power supply for a few moments and plug it back
in; the pump may have air bubbles in the filter which can prevent water from circulating properly.
04/2019 Page 1 / 1 73650
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealt h.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at www.SerenityHealth.com/contact- us/
Purchase Date: / / Order/Customer Reference Number:
Inspect the packaging before discarding to
ensure all parts are accounted for.
