Loading ...
Loading ...
3
Follow the instructions provided
in this book.
• The AquaStation™ Hot must be
used only with the Breville filter
supplied or replacement product
code LWA063.
• This appliance has been
designed specifically for the
purpose of filtering and heating
drinking quality water only.
Under no circumstances should
this appliance be used to heat
any other liquids.
• Do not place the appliance
near the edge of a bench or
table during operation. Ensure
that the surface is level, clean
and free of water and other
substances.
• Do not operate the appliance on
a sink drain board.
• Do not operate the appliance in
an enclosed space, or within a
cupboard.
• Never immerse the appliance,
power cord or power plug in
water, or allow moisture to come
into contact with these parts.
• Do not move the appliance
while it is switched on.
• Always ensure the appliance
returns to standby mode, then
turn the power off at the power
outlet and remove the power
plug from the power outlet
before attempting to move the
appliance, when the appliance
is not in use and before
cleaning and storing.
• Do not remove the water tank
from the power base during
operation.
• If the water tank is removed
from the power base during
water dispensing, the appliance
will automatically stop.
• Always fill the water tank with
water between the minimum
(MIN) and maximum (MAX)
as marked on the water tank.
• Too little water will result in the
appliance not operating and
‘Fill Tank’ will display on the
LCD screen. Filling above the
maximum mark (MAX) may
result in water splashing from
the water tank.
• Ensure the water level is
always above the MIN level for
optimum dispensing flow rate.
• The lid should always be
correctly fitted on the water
tank except when refilling.
• Do not place the appliance
in direct sunlight. Colour
fading and discolouration
may occur when the appliance
is consistently exposed to
sunlight.
• Care should be taken when
handling the appliance during
and after use, ensuring that the
Loading ...
Loading ...
Loading ...