Loading ...
Loading ...
Loading ...
Insertthebagframestrapintothestitchedsleeve
alongthefrontedgeofthebagbottom.Seefigure
13.
Assemblethebagframestraptotheholesinthe
lowerhoppertubesusingtwo1/4"x1-1/8"clevispins
and3/32"haircotterpins.Seefigure13.
BAG FRAME STRAP
1/4" x 1-1/8"
CLEVIS PIN
FIGURE 13
IMPORTANT: Do not over bend the support rods during
the following step. Over bending wilt cause the spring steel
rods to loose supporting tension.
• Assemble the two hopper support rods as shown in
figure 15. Place the ends of the rods into the upper and
lower hopper tubes, bending the rod just enough to fit
into the holes in the tubes.
FIGURE 15
• Secure the bag corners around the lower hopper
tubes by snapping the bag flaps to the bag bottom.
See figure 14.
SNAP
FIGURE 14
• Assemble a vinyl cap onto each bag arm tube as
shown in figure 16.
VINYLCAP
FIGURE 16
8
Loading ...
Loading ...
Loading ...