Loading ...
Loading ...
Loading ...
ASSEMBLY OF HOPPER BAG
Hold the (LH) upper hopper tube so that the hole for
the brace rod faces down. Insert the (LH) upper
hopper tube down through the stitched flap on the left
side of the hopper bag. Repeat for the right hand
upper hopper tube. See figure 9.
(LH) UPPER
HOPPER
TUBE
HOPPER
BAG
BOTTOM
Turn the rear hopper tube so that the brace holes in
the middle of the tube face up. Assemble the ends of
the rear hopper tube onto the ends of the lower
hopper side tubes. Fasten together using plastic
plugs. See figure 11.
REAR HOPPER TUBE
(brace holeson top)
LOWER
HOPPER
SIDETUBE
FIGURE 11
FIGURE 9
Slide the two upper hopper tubes together and line
up the center holes as shown in figure 10.
Fasten the upper hopper tubes together by inserting
a plastic plug into the center holes. See figure 10.
PLASTIC PLUG
i
d_
FIGURE 10
Place the assembled lower hopper tubes into the
bottom of the hopper bag as shown in figure 12.
Attach the ends of the lower hopper side tubes to the
inside of the upper hopper tubes using two 3/8" x
1/2" clevis pins inserted from the inside, and two
3/32" hair cotter pins. See figure 12.
3/32" HAIR
COTTER PIN
\
/
LOWER HOPPER SIDE TUBE
t
3/8" x 1/2"
CLEVIS PIN
HOPPER BAG
BOTTOM
FIGURE 12
7
Loading ...
Loading ...
Loading ...