Loading ...
Loading ...
Loading ...
Setting the Clock and
Minute Timer
D • •
]
7
Note: The oven function will not |
Iwork if the time of day clock is not
L
[set.
To Set tile (Ioc ;,
When the range is first plugged in, or when the power supply to the range
has been interrupted, the display will flash "12:00".
1. Push _.
2. Within 5 seconds, push and hold the _ or _ until the correct
rtl
Z
time of day appears in the display. G_
Note: The clock cannot be changed during any timed bake or self-clean M3
cycle. ::_
ifb Set the _ai_-_ _.e Timer
1. Push 8'
2. Push the [_ to increase the time in one minute increments. Push
and hold the _ to increase the time in 10 minute increments. The
timer can be set for any amount of time from 1 minute to 11 hours and
59 minutes.
Note: If you push the _) first, the timer will advance to 11 hours
and 59 minutes.
3. The display shows the timer count down in minutes until one minute
remains, Then the display wiiI count down in seconds,
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until _ is pushed.
Note: The minute timer does not start or stop cooking, it serves as an extra
timer in the kitchen that will beep when the set time has run out. The
minute timer can be used alone or during any of the other oven functions.
When the minute timer is in use with any other mode, the minute timer will
be shown in the display. To view other functions, push the function pad for
that mode.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the (_
or _) to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push _.
7
Loading ...
Loading ...
Loading ...