Loading ...
Loading ...
Loading ...
YourcleaningsystemrequiressomeassembIyandisready
foruseonlyafterit hasbeenproperiyservicedwiththe
recommendedoilandfuel.
Jfyou have any prohbms with the assembly of your
pressurewasher, please call the pressurewasher hempJine
at 1o800o222o3136.
UNPACKTHE PRESSUREWASHER
1. Remove everything from carton except pressure washer.
2. Opencarton completely by cutting each corner from top
to bottom.
3. Remove pressure washer from carton.
CARTONCONTENTS
Checkali contents, if any parts are missing or damaged,call
the pressure washer hetpline at 1o800o222o3136.
° Main Unit
° Handle
, 6baning TankAssembly
, High PressureHose
, Spray Gun
, Nozzb Extensionwith Quick Connect Fitting and Spray
TipHolder
, Oil Bottle
, Parts Bag (which includes the following):
, Operator's Manual
, Owner's Registration Card
, Safety Goggles
, Gun Holder Wireform
, DetergentSiphoning Hose/Filter
° Bagcontaining 4 multi-coiored Spray Tips
, HandleFasteningHardwareKit (whichincludes):
, Carriage Bolts (2)
, "L" Bolt
° Plastic Knobs (4)
, Tree Clips (4}
Becomefamiliar with each piece before assembling the
pressure washer, identify ali contents with the iiiustrationon
page 6. if any parts are missing or damaged, calJthe
pressure washer helpline at 1o800o222o3136.
A$$EJVJBLJNGCLEANINGSYSTEJVJ
Your Craftsman cleaning system will need assembly before
operation:
1. Fill out and send in registration card.
2. Attach handleand cleaning tank.
3. Connect detergent siphon hose to pump.
4. Add eli to engine crankcase.
5. Add fuei to fuel tank.
6. Connect pressure hose to spray gun and pump.
7. Connectwater supply to pump.
8. Attach nozzleextension to spray gun.
9. Select/attachquick connect spray tip to nozzb extension.
Attach Handle and Cleaning Tank
1. Placehandle (A) onto handlesupports (B) connected to
main unit. Make sure holes (C) in handle align with holes
(g) on handle supports.
NOTE:It may be necessaryto move the handle supports
from side to side in order to align the handle so it will slide
over the handb supports.
2. Insert carriage bolts (A) through holes from back of unit
and attach a plastic knob (B) from front of unit. Tighten
by hand.
3. Placecleaning tank (B} over holes (C} on handle
(viewing from front of unit). Push the tree clips (A) into
the holes until they sit fiat againstthe cieaning tank.
/
/
/
Insert "L" bolt (A) througil hob just abovecleaning tank
on right side of handJe(viewing from front of unit). Hold
bolt in piace and attach plastic knob (B) from inside of
unit. Tigilten by hand.
Loading ...
Loading ...
Loading ...