Loading ...
Loading ...
Loading ...
Cleaning and Applying Detergent
CAUTION
Chemicaiscan causebodiiy injury, and/or property
damage.
NEVERusecausticliquidwithpressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
rnanufacturersinstructions.
Te apply detergent feiiew these steps:
1. Attach desired detergent siphon hose foiiowing
instructions Attach DetergentSiphon Hose to Pump.
iMPORTANT:Be sure engine is off and allowed to cool before
switching detergent siphoning hoses.
WANNING
;_ Contact with muffler result in serious
area can
burns.
Exhaustheat/gases can ignite combustibies,
structures or damage fueI tank causing a fire.
,', DONOTtouchhot partsandAVOIDhot exhaustgases.
o Allowequipmentto cool beforetouching.
2. Review use of spray tips.
3. Preparedetergent soiution as required by job.
4. Make sure detergent shut-off valve on cleaning tank is in
"Off" position.
5. If using cleaning tank, pour detergent into cleaning tank.
NOTE:The cleaning tank hoids one galion.
6. Make sure black detergent spray tip is instalied.
NOTE:Detergentcannot be appiied with the higil pressure
nozzles (White, Yellow or Red).
7. Make sure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
NOTICE
You must attach aiJhoses before you start the engine.
Startingthe enginewithoutallthe hosesconnectedandwithout
the waterturnedONwill damagethe pump.
Darnageto equipmentresultingfrom failureto followthis
instructionwill void warranty.
8. Engagetrigger iock on spray gun and start engine
foliowing instructions How to Start Your Pressure
Washe,:
9A. If using cleaning tank, rotate detergentshut-off valve on
cleaning tank to "On" position (A).
IMPORTANT:If using detergent siphoning hose, make sure
detergentshut=off valve on cleaning tank is in the "Off"
position.
9B. If using detergent siphoning hose, piace smaii fiiter end
of detergent siphoning tube into detergent container.
NOTE:Make sure the fiiter is fuily submerged in detergent
while applying detergent.
Contact with the hot muffler can damage detergent
siphoning tube.
When inserting the filter into a detergent solution bottle, route
the tube so as to keep it from inadvertently contacting the hot
muffler.
10. Appiy detergentto a dry surface, starting at iower
portion of areato be washed and work upward, using
long, even, overiapping strokes.
11. Aliow detergentto "soak in" for 3-5 minutes before
washing and rinsing. Reappiyas neededto prevent
surface from drying. DO NOTallow detergent to dry on
(prevents streaking).
Pressure Washer Rinsing
Fer Rieein_l;
1. Engagetrigger iock on spray gun.
2. If using cleaning tank, rotate detergent shut-off valve on
cleaning tank to "Off" position.
3. Remove black spray tip from nozzteextension.
4. Selectand instaii desired high pressure spray tip
following instructions How to Use Splay Tips.
5. Keepspray gun a safe distance from areayou plan to
spray.
WARNING
Kickbackfrom spray gun can causeyou to fail.
6.
,', Operatepressurewasherfrom astablesurface.
o BeextrerneIycarefulif you mustusethe pressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
o Firmlygraspspraygun with both handswhenusing high
pressuresprayto avoidinjury whenspraygun kicks back.
Apply a higil pressure spray to a smali area and then
check surface for damage,if no damage is found, you
can assume it is okayto continue rinsing.
Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
Autemati¢ CeeJDewu System {Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circuiating water in the pump can reach temperatures above
125%. The system engagesto cool the pump by dischargieg
the warm water eete the greued.
14
Loading ...
Loading ...
Loading ...