Loading ...
Loading ...
Loading ...
15
ENGLISH
(Original instructions)
BHSM1615DSG 230 1600 500 ≤20 8 2.9
BHSM168DSM 230 1600 500 ≤20 8 2.9
BHSM169DSM 230 1600 500 ≤20 8 2.9
BHSM1610DSM 230 1600 500 ≤20 8 2.9
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Problem Step Possible solution
The steam mop is not
turning on
1. Check the unit is plugged in at the wall
socket.
2. Check the unit is switched on using the
ON/OFF switch (1)
3. Check the fuse in the plug.
The steam mop is not
producing steam
4. The steam mop will only produce steam if
the hand held steam cleaner (5) is
correctly docked into the main body (11)
or the steam hose is tted or the
Autoselect
TM
is turned to ON
5. Check that the water tank is full. Note:
Whenrstlledorafterrunningdryitcan
take up to 45 seconds for steam to be
produced.
6. Check steps 1, then 2, then 3
The steam mop stops
producing steam
during use
7. Check steps 4, then 5, then 3
The steam mop is
producing too much
steam during use
8. Turn the Autoselect
TM
dial (2)
anti-clockwise to reduce the amount of
steam being produced
The steam mop is
producing too little
steam during use
9. Turn the Autoselect
TM
dial (2) clockwise to
increase the amount of steam being
produced
No steam is being
produced from the
hand held steam
cleaner
10. Check that the Autoselect
TM
dial (2) is at
the ON position
11. Check steps 5, then 1, then 2, then 3
The hand held steam
cleaner is producing
too little steam during
use
12. Turn the Autoselect
TM
dial (2) clockwise to
increase the amount of steam being
produced
13. Check step 5
The hand held steam
cleaner is producing
too much steam during
use
14. Turn the Autoselect
TM
dial (2)
anti-clockwise to reduce the amount of
steam being produced
The accessories keep
falling off the unit
15. Refer to the assembly chapter for correct
tting instructions of all parts and
accessories
Steam is escaping
from unexpected areas
of the unit
16. Refer to the assembly chapter for correct
tting instructions of all parts and
accessories
Where can I get further
information/
accessories
17. www.blackanddecker.co.uk/steammop
www.blackanddecker.ie/steammop
Maintenance and cleaning
Your BLACK+DECKER corded appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
Warning! Before performing any maintenance or cleaning on
corded appliances switch off and unplug the appliance.
u Wipe your appliance over using a soft damp cloth.
u For stubborn marks you can use a mild solution of soap
and water to dampen your cloth.
Care of the cleaning pads
Wash care instructions - Pads can be washed at 60°C. Do
not use fabric conditioner. Allow to dry fully before re-use.
Caution! Follow the cleaning instructions printed on the label
of the cleaning pad.
Mains plug replacement (U.K. & Ireland only)
Ifanewmainsplugneedstobetted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
u Connect the green/yellow lead to the earth terminal.
Warning!Followthettinginstructionssuppliedwithgood
quality plugs. Recommended fuse: 13A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Loading ...