Loading ...
Loading ...
Loading ...
14
ENGLISH
(Original instructions)
Steam Cleaning with the mop
u Fit hand held steam cleaner (5) to the steam mop body
(11)
u Placeacleaningpad(13)onthefloorwiththevelcro'loop'
side facing up.
u Lightly press the steam mop down onto the cleaning pad
(13).
u Connect the steam mop to the mains.
u PresstheON/OFFbutton(1).Ittakesapproximately20
seconds for the steam mop to heat up.
u Turn the Autoselect
TM
dial (2) until the required setting is
reached. After a few seconds steam will start to come out
of the steam head.
Note!Whenrstlledorafterrunningdry,itcantakeupto45
seconds for steam to be produced.
u It takes a few seconds for steam to enter the cleaning pad.
The steam mop will now glide easily over the surface to be
sanitized/cleaned.
u Push and pull the steam mop slowly across the surface to
thoroughly steam clean each section.
u Whenyouhavenishedusingthesteammop,return
the handle (8) to the upright position, making sure that it
issupportedandturnit'OFF'.Waituntilthesteammop
coolsdown(approximatelyveminutes).
Caution! It is important to monitor the water level in the
watertank.Torellthewatertankandcontinuetosanitize/
clean stand the mop upright making sure that the handle is
supportedandturnthesteammop'OFF'.Unplugtheunitfrom
theelectricalwalloutlet,andrellthewatertank.
Caution! Never leave the steam mop in one spot on any
surface for any period of time.
Always place the steam mop with the handle (8) supported in
the upright position when stationary and make sure the steam
mop is turned off when not in use.
Carpet refreshing
u Placeacleaningpad(13)ontheoorwiththe'loop'side
facing up.
u lightly press the steam mop down onto the cleaning pad.
u Placethecarpetglider(12d)ontheoor.
u Lightly press the steam mop down onto the carpet glider
until it clicks into place.
u Connect the steam mop to the mains.
u
u
u
u
PresstheON/OFFbutton(1).Ittakesapproximately20
seconds for the steam mop to heat up.
Turn the Autoselect
TM
dial (2) to the Wood/Laminate
setting.
Push and pull the steam mop slowly across the carpet to
thoroughly refresh each section.
Whenyouhavenishedusingthesteammop,returnthe
handle(8)totheuprightpositionandturntheunitOFF.
Waituntilthesteammopcoolsdown(approximatelyve
minutes).
After use
u Turn the Autoselect
TM
dial(2)totheOFFposition.
u Wait until the steam mop cools down.
u Unplug the steam mop from the electrical wall outlet.
u Empty the water tank.
u remove the cleaning pad (13) and wash it ready for next
use (take care to follow the wash care instructions printed
on the cleaning pad).
u Wrap the supply cable around the cable tidy hooks (7 and
9).
u There is a hanging bracket (15) built into the hand grip (6)
which allows your steam mop to be hung from a suitable
hook on the wall. Always ensure that your wall hook is
capable of supporting the weight of the steam mop safely.
u The handle also includes a rubber stopper which allows
your steam mop to be rested safely against a vertical
surface.
Hand held steam cleaning
Warning! Unit will not produce steam unless it is connected to
themainbody(11)orthesteamhose(16)istted.
Warning!Onlyuseinahorizontalposition.
u Attach the required accessory.
u Connect the hand held steam cleaner to the mains.
u PresstheON/OFFbutton(1).Ittakesapproximately20
seconds for the steam mop to heat up.
u Turn the Autoselect
TM
dial (2) until the required setting is
reached. After a few seconds steam will start to come out
of the steam head.
Note!Whenrstlledorafterrunningdry,itcantakeupto45
seconds for steam to be produced.
u Whenyouhavenishedusingthehandheldsteam
cleaner turn the Autoselect
TM
dial(2)totheOFFposition.
TurntheunitOFFbypressingtheON/OFFbutton(1)and
disconnect from the mains supply. Wait until the unit cools
downbeforestoring(approximatelyveminutes).
Accessories
The performance of your appliance depends on the accessory
used. BLACK+DECKER accessories are engineered to high
quality standards and designed to enhance the performance
of your appliance. By using these accessories you will get the
very best from your equipment.
Technical Data
Voltage Power Tank
Capacity
Heat-up
time
Cable length Weight
V
ac
W ml secs m kg
FSMH1321 230 1600 500 ≤20 6 2.7
BHSM168D 230 1600 500 ≤20 6 2.8
BHSM168U 230 1600 500 ≤20 6 2.8
BHSM166DSM 230 1600 500 ≤20 6 2.8
BHSM1615DSM 230 1600 500 ≤20 7 2.9
BHSM1615DAM 230 1600 500 ≤20 7 2.9
Loading ...
Loading ...