Loading ...
Loading ...
Loading ...
12
ENGLISH
(Original instructions)
Attaching the carpet glider (12d) (For use on
carpets only)
u Placethecarpetglider(12d)ontheoor.
u Attachacleaningpadtotheoorcleaninghead(12,12a)
u Lightly press the steam mop down onto the carpet glider
(12d) until it clicks into place.
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop
with the handle (8) supported in the upright position when
stationary and make sure the steam mop is turned off when
not in use.
Removing
the carpet glider
Caution! Always wear suitable shoes when changing the
carpet glider on your steam mop. Do not wear slippers or
open toed footwear.
u Return the handle (8) to the upright position and turn the
steammop'OFF'.
u Wait until the steam mop cools down (approximately 5
minutes).
u Place the front of your shoe onto the carpet glider removal
tabandpressdownrmly.
u Lift the steam mop up and off the carpet glider.
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop
with the handle (8) supported in the upright position when
stationary and make sure the steam mop is turned off when
not in use.
The Delta Head (Fig. D)
This steam mop incorporates a built-in delta head which
enables you to access tight corners and narrow spaces.
Caution! Always wear suitable shoes when accessing the
delta head on your steam mop. Do not wear slippers or
open-toed footwear.
u Turnthesteam-mopto‘OFF’
u Waituntilthesteam-mopcoolsdown(approximatelyve
minutes).
u Place the front of your shoe onto the steam head removal
tab (12c) and press down gently.
u Lift the delta head (12b) up off the steam head (12a)
u Fit the delta head cleaning pad to the bottom of the delta
head.
Note:Removethecleaningpadbeforerettingthedelta
head to the steam head.
u TorefittheDeltahead,placethetipoftheDeltaheadinto
thesteamheadthenpressdownfirmlyensuringthatthe
Delta head clicks into place.
Attaching the hose and accessories to the
hand held steam cleaner (Fig. G - M)
Warning! Inspect the seal between the connection point on
the hand held steam cleaner (5) and the steam hose (16)
before each use. If the seal malfunctions or is damaged,
please contact your nearest authorised repair agent. Do not
use the appliance.
Attaching the hose
u Press the steam hose release button (16a) on the steam
hose (16).
u Connect the steam hose (16) to the hand held steam
cleaner (5) and release the steam hose release button
(16a) making sure it clicks into place.
Important! Ensure that the steam hose (16) is securely
connected to the hand held steam cleaner (5). If steam
escapesfromthejoint,thehoseisincorrectlytted.Switchoff,
allowtheunittocoolthenremoveandretthehose.
Attaching accessories (Fig H)
u Align the lugs on the steam nozzle (17) with the recesses
on the accessory.
u Press the accessory onto the steam nozzle (17) and twist
anti-clockwise until the accessory clicks into place.
Important! All accessories, apart from the SteaMitt
TM
(24)
which has its own hose and connector (25), must be attached
to the steam hose (16) for use.
Removing the hose and accessories
Warning! The steam hose (16), Steam nozzle (17) and
accessories become hot during use. Allow the unit and all
accessories to cool before attempting to remove.
Removing an accessory
u Twist the accessory clockwise then pull away from the
hose (16).
Removing the hose
u Press the steam hose release button (16a) on the steam
hose (16) and pull away from the hand held steam unit.
SteaMitt
TM
Your BLACK+DECKER
TM
SteaMitt
TM
has been designed for
sanitising and cleaning tiles, work tops, kitchen surfaces and
bathroom surfaces. This appliance is intended for indoor
household use only.
Attaching the SteaMitt
TM
hose to the hand held
steam unit
Warning! Inspect the seal on the steam nozzle and hose
before each use. If the seal is missing or damaged then
please contact your nearest authorised repair agent.
Loading ...
Loading ...
Loading ...