Loading ...
Loading ...
Loading ...
_WARNING: Toavoidseriousinjury,
beforeperformingany serviceand
adjustments:
1. Stopengine.
2. Makesurethe rotatinglinesandall
movingpartshavecompletelystopped.
3. Disconnectsparkplugwirefromspark
plugandplacewhereit cannotcome in
contactwith plug.
TRIMMER
TO ADJUSTTRIMMING HEIGHT
See "TO ADJUST TRIMMING HEIGHT" in
the Operation section of this manual.
TO ADJUST HANDLE
The upper handle may be adjusted to dif-
ferent height positions.
• Loosen handle knob only enough to
allow the upper handle to pivot to the
desired position.
• Tighten handle knob securely.
NOTE: The handle knob and bolt may be
reversed for left handed operation.
Upper handle
TO REMOVE/REPLACE TRIMMER HEAD
DRIVE BELT
1. Remove screw at front of chassis cover.
2. Lift cover up and away from trimmer.
3. Remove the two (2) screws on sides of
Chassis
.
5.
trimmer securing the debris shield.
Turn trimmer on its side with carburetor
and fuel cap up.
Remove the two (2) screws on under-
side of trimmer securing the debris
shield.
6. Slide the debris shield rearward and
remove.
7. Remove belt from engine pulley on
crankshaft.
8. Remove belt from trimmer head pulley.
Er_
pulley
Handle knob
Debris shield screws
13
Loading ...
Loading ...
Loading ...