User Manual Frigidaire FMB330RGS0 dishwasher

Frigidaire FMB330RGS0 dishwasher - Use Manual - Use Guide PDF.
Documents: Go to donwload!
User Manual
  • Owner's manual - (English)
Installation Instruction
  • Installation Instruction - (English)

User manual of Frigidaire FMB330RGS0 (14 pages)
file thumbnail

Record All Information For Future Reference

Brand: Purchase Date:

Model #:

Serial #: (see Features page for location)

Questions?

(United States)

Product Registration Card

Please fill in completely. sign and return promptly!

Safety Instructions

Features

Operating Instructions

Preparing and Loading Dishes 5-6

Dishwasher Dispenser and Detergents

Factors Affecting Performance

Care and Cleaning

9-1o

Connecting Portable Dishwasher

Solutions to Common Dishwashing Problems 12-13

Troubleshooting

Consumer Services

Warranty & Service .

(Canada)

READ AND SAVE THESE INSTRUCTIONS P/N154637701 (0701)

Important Safety Instructions

This symbol will help alert you to such dangers as personal injury. burns. fire and electrical shock.

To reduce the risk of fire. electrical shock. or injury when using your dishwasher. follow basic precautions including the following:

Read all instructions before using your dishwasher.

Use yourdishwasheronly as instructed in this Use and Care Manual.

This Manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing. operating and maintaining any appliance. DISHWASHER MUST BE ELECTRICALLY GROUNDED.

Read the Installation Instructions for details.

This dishwasher is designed to operate on regular house current (120 V. 60 Hz). Use a circuit equipped with a 15 ampere fuse or circuit breaker.

Use a 20 ampere fuse if dishwasher is connected with a food waste disposer.

Do not operate dishwasher unless all enclosure panels are in their proper place.

Removethe doortothewashing compartment when removing an old dishwasher from service or discarding it.

Keep young children and infants away from dishwasher when it is operating.

Do not let children abuse. sit. stand or play on door or racks of a dishwasher.

Use only detergents and rinse agents recommended for use in a dishwasher.

Store dishwasher detergent and rinse agents out of the reach of children.

Do notwash plastic items unless marked "dishwasher safe" or the equivalent.

Check with manufacturer for recommendations. if not marked.

Items that are not dishwasher safe may melt and create a potential fire hazard.

If the dishwasher drains into a food disposer. make sure disposer is completely empty before running dishwasher.

Disconnect electrical power to dishwasher before servicing.

Repairs should be done by a qualified technician.

Do not tamper with controls.

Do not touch the heating element during or immediately after use.

When loading items to be washed:

Locate sharp items and knives so that they are not likely to damage the door seal or tub.

Load sharp items and knives with the handles up to reduce the risk of cut-type injuries.

Under certain conditions. hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE.

If hot water system has not been used for such a period. before using dishwasher. turn on all hot water faucets and let water flow from each for several minutes.

This will release any accumulated hydrogen gas.

HYDROGEN GAS IS FLAMMABLE.

Do not smoke or use an open flame during this time.

Do not store or use combustible materials. gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

SAVE THESE INSTRUCTIONS

+2002 Electrolux Home Products.

Inc.

All rights reserved.

Printed in U.S.A.

Dishwasher Features

Your dishwasher. illustrated below. cleans by spraying a mixture of hot. clean water. and detergent against the soiled surfaces of your dishes and tableware.

Each cycle starts with a pre-drain.

Next. the dishwasher fills with water to a level even with the heating element.

This water is constantly pumped through the rotating spray arm and sprayed onto the dishes.

Soiled water is pumped out and replaced with clean water during cycle.

The number of water fills depends upon the cycle being used.

Upper Rack

Control Panel

Upper Spray Arm Door Spring

Lower Rack

Lower Spray Arm Panel

Motor

Toe Kick

Leveling Legs

Operating Instructions

Getting Started

Check Filter (See Cleaning Filter)

Load dishwasher (See Preparing and Loading Dishes).

Add detergent (See Dishwasher Dispenser Detergents).

Add rinse aid. if needed (See Rinse Aid).

Select wash cycle (See Cycle Chart).

Select desired OPTIONS.

See page 11 for instructions on connecting the portable dishwasher.

Run hot water faucet nearest dishwasher until water is hot. Turn water off.

To start. close door to latch.

Cycle Chart Cycles Description To Select Cycle Water Time* Washes/ (approx.) Rinses

Heavy For heavily soiled dishes

• Turn dial to HEAVY WASH. gal.

143 min.* 2 washes Wash and silverware.

• Select desired OPTIONS. imp.gal.

5 rinses 36.4 liters

Normal For regularly soiled dishes

• Turn dial to NORMAL WASH. gal.

128 min.* 2washes Wash and silverware.

• SelectdesiredOPTIONS. imp.gal.

4rinses 19.8 liters

Light For lightly soiled or pre-rinsed

• TurndialtoLIGHTWASH. gal.

112min.

2washes Wash dishesandsilverware.

• SelectdesiredOPTIONS. imp.gal.

3rinses 16.5 liters

Rinse/ For rinsing dishes that will be

• DONOTUSEdetergent. gal.

20min.

1rinses Hold washed later.

• Turndialto RINSE/HOLD. imp.gal.

• Select COOL DRYoption. liters

Delicate For lighty soiled or pre-rinsed

• Turn dialto DELICATE. gal.

80 min.* 2washes Delicate dishes.

• Selectdesired OPTIONS. imp.gal.

2 rinses 13.2 liters

Plate Forwarming dishesand serving

• Load Clean plates and dishes to Warmer platesbeforeservinghotfoods. bewarmed.

• Turn dial to PLATE WARMER.

• Press HOT DRY Option.

• Includes dry time.

Operating Instructions

Dish Preparation

It is not necessary to rinse dishes before putting them into the dishwasher.

Just remove large pieces and quantities of food. bones. pits. etc.

Empty glasses and cups.

It may be necessary to presoak or lightly scour firmly cooked-on or baked-on foods.

Foods such as mustard. mayonnaise. vinegar. lemon juice and tomato-based products may cause discoloration of stainless steel and plastics if allowed to sit for a long period of time.

Unless the dishwasher is to be operated at once. it is best to rinse off these food soils.

Load dishes facing the center of the rack so that the water spray from the rotating spray arm can reach soiled surfaces.

Be sure large items do not block the detergent dispenser. preventing it from opening during the wash cycle.

To be sure an item is dishwasher safe. read the manufacturer's care instructions.

If the dishwasher drains into a food disposer. be sure disposer is completely empty before dishwasher is started.

To save energy. wash full loads.

For best washing results. load correctly and avoid overloading.

Energy Options

Hi-Temp Wash Option

When HI-TEMP WASH ON option is selected. the dishwasher heats the water in the main wash to

To turn off option. select HI-TEMP WASH OFF.

Heated Dry Option

HEAT DRY ON option provides faster drying since the heating element is on during the drying portion of cycle.

The HEAT DRY option in combination with rinse aid will give you excellent drying results.

The energy to use HEAT DRY costs pennies per cycle.

You may turn off the HEAT DRY option. however

With either option. you may see water vapor coming from vent during the washing and/or drying portion of cycle.

On some models. the vent is closed during washing to hold moisture and sound inside and then opens for drying.

The drying option may be changed at any time during the cycle and affects only the drying period.

Preparing and Loading Dishes

Loading the Top Rack

Glasses and cups--Place glasses and cups against outside pins at an angle.

Cups with a concave bottom will collect water.

Small plates and saucers--Place dishes between middle two rows of pins.

Plasticware--Load plasticware in the top rack to avoid melting.

Bowls--Place bowls between the middle 2 rows of pins facing down.

Miscellaneous items--Place long handled knives and utensils in top rack.

Cup Shelf--The cup shelf can be folded down over short items (juice glasses. cups. etc.) for

Loading the Bottom Rack

Large plates and platters--Place between the support pins with soiled sides facing inward.

Bowls. casseroles and sauce arts Load upside down or at an angle facing reward.

Shghtty tilting tems wtl provide better drainage.

Pots and pans--Place upside down and at an angle.

Do not allow handles to protrude through bottom of rack. blocking wash arm rotation.

Load large items at the sides and not across the front so they do not block the detergent dispenser preventing it from opening.

Loading the Silverware Basket

Load sharp items with handles up.

Be sure items do not protrude through the holes in the basket and stop the rotation of the spray arm.

Load silverware so items are mixed in each

Adding a Dish

Make sure there is a full wash cycle yet to be completed so that any added items are

Dishwasher Dispenser & Detergents

Filling the Detergent Dispenser

The detergent dispenser has one covered and one uncovered cup. Detergent in the uncovered cup falls into the dishwasher when the door is closed.

The

How much Detergent to use

The amount of detergent to use depends on the water hardness.

Water hardness is measured in grains per gallon.

Using too little detergent can result in poor cleaning and hard water filming or spotting.

Using too much detergent in soft water can cause a permanent film called etching.

Your local water company. water softener company or county extension agent can tell you the water hardness in your area.

The use of industrial grade detergent can damage the heating coil and other parts of the

Useonlyfreshautomaticdishwashingdetergent.

Other detergents will cause oversudsing.

Add detergent just before starting cycle.

Store detergent in a cool. dry location.

Moist or caked detergent will not dissolve properly.

Do not fill both washcups. unless you have very hard water. see chart below*.

Pre Wash

Large Wash Cup Top Cover (Heavy Loads)

Cover Latch

Cup (Light Loads)

Note: If the cover is closed on the Main Wash

Cup. open by pressing the cover latch.

Detergent Usage Guide

Cycle Soft Water Medium Hard Water Hard Water Very Hard Water* (0-3 grains) (4-8 grains) (9-12 grains) (over 12grains)

H eavy Was h

Normal Wash

Light Wash

1.5 teaspoons (each cup 1/4 full)

1.5 teaspoons

(Main Wash cup

1/4 futl)

4 teaspoons

(each cup-fill to line above "Regular")

4 teaspoons

(Main Wash cup-fill to

6 teaspoons

(each cup completely full)

6 teaspoons

(Main Wash cup

Each Cup Completely Full (water softener recommended)

Main Wash Cup Completely Full (water softener recommended)

Rinse/Hold No Detergent (water softener recommended)

Note: For very hard water. detergent alone may not be enough.

A water softener is recommended to improve water quality and dishwashing performance.

Try adding more detergent at the beginning of the main wash portion of the cycle. As a rule. use 1 teaspoon for each grain above 12. Unlatch the door. open slowly and add detergent to the bottom of the tub. Close the door to latch and the dishwasher will continue through the cycle.

Factors Affecting Performance

Rinse Aid

Rinse aid greatly improves drying and reduces water spots and filming.

Water "sheets" off dishes rather than forming water droplets that cling and leave spots.

A dispenser. located next to the detergent cup.

To add liquid rinse aid. turn dispenser cap 1/4 turn counterclockwise and lift out.

Pour in rinse aid until

Do not overfill since this can cause oversudsing.

Wipe up any spills with a damp cloth.

The dispenser holds enough for 35 to 140 washes. depending on setting.

Dispenser Opening Indicator

Less More

Adjustable setting

Dispenser Cap

Water Pressure

Water pressure should be between 20 and 120 pounds per square inch.

Low water pressure occurs most often during periods of high water consumption. such as when laundry or showers are being done.

To determine if you have enough water pressure. put a 2 quart container under fully opened hot water faucet nearest the dishwasher.

It should fill in tess than 14 seconds.

Be sure all

Water Temperature

Hot water is needed for best dishwashing and drying results.

Water entering dishwasher should be at least 120°F (49°C) to give satisfactory results.

To check water temperature entering dishwasher:

Turn on hot water faucet nearest dishwasher for

Hold a candy or meat thermometer in stream of water to check the temperature.

If temperature is below 120°F (49°C). have a qualified person raise the hot water heater thermostat setting.

Important: Before starting a cycle. run hot water to clear cool water from pipe.

The HEAT DRY option in combination with rinse aid will enhance drying performance.

The energy required to use the HEAT DRY option costs pennies per cycle.

You may choose not to select the HEAT DRY option; however you will have items in your dish load that will not be completely dry at the end of the

Care and Cleaning

Burn Hazard

Allow heating element to coot before cleaning the interior.

Failure to do so can result in burns.

Outside--Occasionally wash with a mild nonabrasive detergent and water.

Rinse and dry.

Inside--The inside of the dishwasher is self

To clean stainless steel wipe with the grains.

Use a Dishwasher Safe Detergent to help with the stains or discolorations.

NEVER use products that contain Chlorine Bleach or Citric Acid.

Important: The dishwasher motor is permanently lubricated at the factory and does not need to be oiled.

Care of Drain Air Gap

If a drain air gap was installed for your built-in dishwasher. check to make sure it is clean so the

Winterizing

A dishwasher left in an unheated place should be protected from freezing.

Have a qualified person do the following:

To Disconnect Service:

Turn off electrical power to the dishwasher at the supply source by removing fuses or tripping circuit breaker.

Shut off water supply.

Place a pan under the inlet valve.

Disconnect water line from inlet valve and drain into pan.

Disconnect drain line from pump and drain water into pan.

Note: See Installation Instructions for more details.

To Restore Service:

Reconnect the water. drain. and electrical power supply.

Turn on water and electrical power supply.

Fill both detergent cups and run dishwasher through a NORMAL WASH Cycle.

Check connections to make sure they do not leak.

Note: See Installation Instructions for more details.

Care and Cleaning continued

Property Damage Hazard

Freezing temperatures may cause water lines to rupture.

Be sure all supply lines to and circulating lines within dishwasher are protected.

Failure to do so could result in property damage.

Filter

Cleaning the Filter

For optimum performance. your dishwasher is equipped with a filter assembly featuring a main filter. cup and fine filter as shown in the drawing above.

All food fragments are removed from the dishwasher as water passes through the filter assembly.

Each part of the assembly should be cleaned often to ensure that all food fragments are removed from the dishes.

To remove food fragments from the filter assembly. the filters must be removed from the dishwasher.

To remove the filters. pull up on the edge of the main filter.

Next. rinse the main filter and fine filter under running water.

Cleaning with a brush may also be necessary to remove any fragments trapped in the filters.

Once cleaning has been completed. simply reassemble the filter as shown in the drawing above.

To ensure that the filter is fully seated. please press down on the top of the main filter.

Using the dishwasher without a properly installed filter is not recommended as it will reduce the

Cleaning the Spray Arm

The spray arm may need to be cleaned to insure that there are no clogs to the spray arm jets and bearings due to hard water chemicals.

To remove spray arm simply hold the spray arm in place and turn the retaining nut clockwise and putt up on the spray arm lifting off the shaft.

To clean the spray arm use warm soapy water using a soft brush to clean the jets and bearings.

To replace the spray arm simply set the spray arm on the shaft. take the retaining nut and turn it counter clockwise till it has locked into place.

Connecting and Disconnecting the Portable Dishwasher

The portable dishwasher must be connected to a faucet and electrical outlet each time it is used.

Follow directions on this page to properly connect dishwasher.

IMPORTANT: Make sure door is latched before moving dishwasher.

Faucet Adapter

Assembly (Figure A)

Connecting the Portable Faucet Adapter

Assembly (Figure B)

Electric Shock Hazard Avoid fire hazard or electrical shock.

Do not use an adapter plug. extension cord or remove grounding prong from electrical power cord.

Failure to follow this warning

Grounding type wall receptacle

Power supply cord with 3-prong grounding plug

The power cord and faucet coupler with hoses are located in a compartment in back of dishwasher.

A special adapter must be installed on faucet before you can connect dishwasher (Figure A).

1. Remove faucet adapter assembly from literature package.

Unscrew existing sink faucet aerator.

3. Check faucet spout to see if threads are inside or outside.

• If threads are on inside of faucet spout. use both rubber washers.

• If threads are on outside of faucet spout. use one rubber washer only.

• If faucet has no threads. an adapter kit with instructions for attachment to a non-threaded spout is available at most hardware stores.

4. Assemble faucet spout as shown in Figure A.

Connecting the Portable Dishwasher

Run water at faucet until it is hot. Turn off faucet.

Pull hoses out of compartment.

Push collar down and slip faucet connector onto faucet adapter (Figure B).

When connector snaps into place. release collar.

Slowly turn on hot water all the way.

Plug power cord into grounded outlet.

Disconnecting the Portable Dishwasher

When cycle has finished. unplug power cord and return it to compartment.

Turn off hot water.

Press red button on coupler to release water pressure.

Press down on collar to release coupler.

Empty remaining water from coupler and return it to compartment.

IMPORTANT: A sink spray hose can burst due to constant water pressure while in use. If your spray hose is installed on same water line as the dishwasher. it is your responsibility to disconnect sink's spray hose and to plug hole.

Electrical Connection for a Portable Dishwasher

An electrical supply of 120 volts. 60 Hz. AC only.

15 amps is required.

For your safety. the dishwasher must be grounded.

If there is a malfunction or breakdown. grounding will reduce risk of electrical shock.

This dishwasher has a power cord with a 3-prong grounding plug.

It must be plugged into a mating 3-prong grounding type receptacle. installed and grounded in accordance with the National Electrical Code and any local codes and ordinances.

Common Dishwashing Problems and Solutions

Dishes not clean--check pages 4 to 8 for information on correct wash cycle. proper loading. water temperature. water pressure. hard water. amount of detergent. old and ineffective detergent. and dish placement.

To maximize wash performance clean the filter of all large food particles after each wash.

To ensure that you clean the filter correctly refer to page

Dishes not drying can be greatly improved by using a rinse aid andhot water.

Hot water raises temperature of dishes to speed up drying.

When loading. invert cups and bowls so that water can run off.

Avoid nesting of articles.

If dishes are not completely dry at end of cycle (which may occur when COOL DRY setting is used). open door. roll out racks. and allow dishes to air dry.

Spotting--spots form when hard water droplets evaporate leaving a deposit.

Low phosphate detergents increase the problem in hard water.

To prevent. use hot water and a detergent with a higher level of phosphates (preferably 8.7% or higher). or use more of a tow phosphate detergent.

Be sure to use a rinse aid. If water is very hard. it may be necessary to install a water softener.

Load glasses and plates so they have minimum contact with racks and pins. Avoid overloading.

Spotting will occur where dishes and glasses touch.

Cloudy films and streaking are usually caused by a combination of hard water and an insufficient amount of detergent.

Low phosphate detergents are also a factor.

To correct. increase amount of detergent. check water temperature and always use a rinse aid. If water is very hard. it may be necessary to install a water softener.

Etched film on glassware is caused by using too much detergent in soft or softened water.

This film cannot be removed.

It is more likely to occur on soft leaded glass or expensive crystal.

An early warning of this condition is a cloudy iridescent appearance on glasses.

To prevent. be sure dishwasher is getting a full fill of water.

Water should reach base of heating element.

If water level is low. have water pressure checked by a plumber.

Use less detergent and make sure water

Crazing of older china and pottery happens when items are subjected to very hot water.

Once crazing (fine cracks in the glaze) appears. it cannot be removed.

Do not machine wash again or condition may worsen.

Coffee and tea stains can occur when water contains traces of iron. To avoid stains. rinse

Gray-black stains on dishes are caused by manganese in water supply.

To correct. install manganese filtering system into house water supply.

Reddish-brown stains on dishes. glasses and interior are caused by iron in water.

To avoid iron stain. increase detergent. use water heated to approximately 140°F (60°C) and a rinse aid. It may be necessary to install a water softener with an iron removal unit. To improve appearance. use a commercial rust and lime scale remover.

Plastic items can lose their shape due to high temperatures of automatic dishwashing.

Read labels before washing.

Place washable items in top rack away from heating element.

Discoloration of plasticware by some foods. such as tomato sauce. can stain ptasticware.

If stained. soak item in solution of 1 tablespoon dishwasher detergent and a quart of hot water or in a solution of 1/2 cup (120 ml) bleach and a quart (1 L) of hot water.

Fading of patterns and metallic trim is due to many washings. detergent and hot water.

Common Dishwashing Problems and Solutions continued

Troubleshooting

Most of today's china is dishwasher safe.

Antique. handpainted china. and handpainted pottery should be washed by hand.

Do not place silver next to or touching stainless steel utensils in dishwasher silverware basket.

This can cause pitting of stainless steel blades. (Most silver knives have stainless steel blades.

Do not let blades touch other stainless steel utensils during wash cycle.)

Tarnish on silver plate occurswhen worn down to the base metal and turns a bronze color when exposed to hot water and detergent.

Remove bronzing by soaking item in vinegar for 10 minutes or use a silver polish.

For permanent protection. have silver reptated.

Silver tarnish can be caused by prolonged contact with air or with foods containing sulphur like eggs. mayonnaise. or seafood.

Contact with undissolved detergent can also cause tarnish.

To prevent this. rinse silver soon after use.

Use care not to pour detergent directly onto silver.

Remove tarnish with a silver polish.

Discoloration of stainless steel--Food soil can create a film or discoloration.

To avoid. rinse stainless items promptly.

Food soil films can be removed with a stainless steel cleanser or mild

Pitting of stainless steel is causedby prolonged contact with detergent granules and foods like salt. mayonnaise. fruits. butter or milk.

To prevent. rinse soon after use.

Do not allow detergent to fall directly onto stainless steel items.

Discoloration of aluminum--Anodized (colored) aluminum cannot withstand machine washing.

Resulting loss of color is permanent.

Other aluminum may darken when machine washed.

To decrease chance of discoloration. do not place aluminum directly beneath detergent dispenser.

To brighten darkened items. scour with soap filled steel wool pads.

For severely darkened pans. simmer an acidic food or a solution of 2 teaspoons (10 ml) cream of tartar per quart (1 L) of water for 1/2 hour.

Scour with soap filled steel wool pad. rinse and dry.

Knife handles become loose when the cement is exposed to very hot water.

Test wash single knife for several weeks.

Damaged knives should be professionally re-cemented.

Before calling for service. review this list.

It may save you both time and expense.

This list includes common experiences that are not the result of defective workmanship or material.

Noise problems?

It is normal to hear swishing and pulsating sounds.

These sounds mean that water is circulating through the dishwasher.

It is normal to hear motor sounds before water enters tub.

Loud ticking usually means something is hitting wash arm. See Preparing and Loading Dishes.

Vibrating or rattling sounds can mean dishes are touching each other.

See Preparing and Loading Dishes.

Operating problems?

Be sure door is firmly closed.

It is normal for dishwasher to pause between cycles.

Leaking

Check for items sticking out of dishwasher that could prevent door from closing and sealing properly.

Use only fresh dishwashing detergent to avoid oversudsing.

Water coming through door vents?

When a dish is added after starting dishwasher. wait a few seconds before latching door.

This permits entering cold air to expand slowly inside dishwasher.

Dishes not dry?

Check to see if rinse aid dispenser needs refilling.

Hot water temperature may be too low (min. 120°F 49°C).

If COOL DRY option is being used. additional drying time may be required with door open.

Water in tub?

A small amount of water in bottom of tub is normal.

It keeps water seal lubricated.

Uetergent left in cup?

Detergent may be too old. Discard old detergent.Use fresh detergent.

Dishes may not be loaded properly.

Be sure items do not protrude from front of bottom rack preventing detergent cup from opening.

Your appliance is covered by a one year limited warranty.

For one year from your original date of purchase.

Electrolux wilt pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed. used and maintained in accordance with the provided instructions.

Exclusions This warranty does not cover the following:

Products with original serial numbers that have been removed. altered or cannot be readily determined.

Product that has been transferred from its original owner to another party or removed outside the USA or Canada.

Rust on the interior or exterior of the unit.

Products purchased "as-is" are not covered by this warranty.

Food loss due to any refrigerator or freezer failures.

Products used in a commercial setting.

Service calls which do not involve malfunction or defects in materials or workmanship. or for appliances not in ordinary household use or used other than in accordance with the provided instructions.

Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

Expenses for making the appliance accessible for servicing. such as removal of trim. cupboards. shelves.

10. Service calls to repair or replace appliance light bulbs. air filters. water filters. other consumables. or

11. Surcharges including. but not limited to. any after hour. weekend. or holiday service calls. tolls. ferry trip

Damages to the finish of appliance or home incurred during installation. including but not limited to floors

Damages caused by: services performed by unauthorized service companies; use of parts other than

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT

REPAIR OR REPLACEMENTAS PROVIDED HEREIN.

CLAIMS BASED ON IMPLIED WARRANTIES.

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE.

ARE

LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW.

BUT NOT LESS THAN ONE YEAR.

ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS

PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN

LIMITED WARRANTY ORANY IMPLIED WARRANTY.

SOME STATES AND PROVINCES DO NOTALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.

OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES.

SO THESE LIMITATIONS OR EXCLUSIONS MAY NOTAPPLY TO YOU.

THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.

YOU MAYALSO HAVE OTHER

RIGHTS THAT VARY FROM STATE TO STATE.

If You Need

Service Keep your receipt. delivery slip. or some other appropriate payment record to establish the warranty period

This warranty only applies in the USA and Canada.

In the USA. your appliance is warranted by Electrolux Major Appliances

North America. a division of Electrolux Home Products.

Inc.

In Canada. your appliance is warranted by Electrolux Canada

Corp.

Electrolux authorizes no person to change or add to any obligations under this warranty.

Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company.

Product features or

USA 1.800. 44. 044

Electrolux Major Appliances North America P.O. Box 212378

Augusta.

GA 30907 E|ectrolu×

Canada 1.800. 68. 606

Electrolux Canada Corp.

5855 Terry Fox Way Mississauga.

Ontario.

Canada L5V 3E4



Newest Added: FFEF3016TWB FRT18S6JW6 PLGC30S9ECA GHSC39ETES2 FRT18L4JW6

Frigidaire FMB330RGS0 | Pages: 14 | File type: PDF | Filename: 94081859_fmb330rgs0.pdf | Size: 1.48 MB | Language: English | Other documents: 1 files.

Download User Manual

Contact us

Frigidaire in United States

1-800-374-4432 Mon-Fri, 8:30am - 8pm (EST)