Loading ...
Loading ...
Loading ...
Care and Cleaning
Burn Hazard
Allow heating element to coot
before cleaning the interior.
Failure to do so can result in
burns.
Outside--Occasionally wash with a mild
nonabrasive detergent and water. Rinse and dry.
Inside--The inside of the dishwasher is self-
cleaning with normal use.
To clean stainless steel wipe with the grains.
Use a Dishwasher Safe Detergent to help with the
stains or discolorations.
NEVER use products that contain Chlorine Bleach
or Citric Acid.
Important: The dishwasher motor is
permanently lubricated at the factory and does
not need to be oiled.
Care of Drain Air Gap
If a drain air gap was installed for your built-in
dishwasher, check to make sure it is clean so the
dishwasher will drain properly. Drain air gaps are
usually mounted on countertop and can be
inspected by removing the cover. A drain air gap is
not part of your dishwasher and is not covered by
this warranty.
Winterizing
A dishwasher left in an unheated place should be
protected from freezing. Have a qualified person
do the following:
To Disconnect Service:
1. Turn off electrical power to the dishwasher at
the supply source by removing fuses or
tripping circuit breaker.
2. Shut off water supply.
3. Place a pan under the inlet valve. Disconnect
water line from inlet valve and drain into pan.
4. Disconnect drain line from pump and drain
water into pan.
Note: See Installation Instructions for more
details.
To Restore Service:
1. Reconnect the water, drain, and electrical
power supply.
2. Turn on water and electrical power supply.
3. Fill both detergent cups and run dishwasher
through a NORMAL WASH Cycle.
4. Check connections to make sure they do not
leak.
Note: See Installation Instructions for more
details.
Loading ...
Loading ...
Loading ...