Loading ...
Loading ...
Loading ...
34
Sealed Burner Models Only:
Turn burner to LOW setting to ignite.
Lazy flame – floats, larger in
size than normal
Low propane supply (for LP users)
Low flame setting needs adjustment
Fill the propane tank.
Turn on/off valve fully to on.
See Top Burner Air Shutter or Low Flame
Setting instructions.
Lifting flame – well-defined
with visible inner core, noisy,
gap between burner and flame
Incorrect regulator setting.
Low flame setting needs adjustment
Set regulator to proper setting - Liquid Propane
or Natural Gas.
See Top Burner Air Shutter or Low Flame
Setting instructions.
OVEN
PROBLEM
POSSIBLE CAUSE
SOLUTION
Oven will not ignite (RNB,
RCS, Platinum™)
Takes up to three minutes to ignite.
No electrical power to the unit.
Gas not flowing to oven.
Igniter does not glow red
Wait three minutes.
Plug into a three-prong electrical outlet that is
properly grounded.
Check and re-set circuit breaker for the wall
outlet used for this unit.
Turn a top burner on. If top burner ignites, call
for service.
Make sure gas supply valve is on.
Lazy flame – floats, larger in
size than normal
Low propane supply (for LP users)
Needs an air shutter adjustment
Fill the propane tank.
Turn on/off valve fully to on.
See Oven Burner Air Shutter Adjustment
instructions.
Lifting flame – well-defined
with visible inner core, noisy,
gap between burner and flame
Incorrect regulator setting.
Air shutter adjustment
Set regulator to proper setting - Liquid Propane
or Natural Gas.
See Oven Burner Air Shutter Adjustment
instructions.
Oven light not on
No electrical power to the unit.
Oven light bulb burned out.
Plug unit into a three-prong electrical outlet
that is properly grounded.
Check and re-set circuit breaker for the wall
outlet used for the unit.
Replace with 40 Watt Appliance light bulb only.
See Replacing Oven Bulb instructions.
Platinum only: Replace with 25 Watt.
Convection fan does not turn
No electrical power to the unit.
Fan guard is obstructed or clogged.
Plug into a three-prong electrical outlet that is
properly grounded.
Check and re-set circuit breaker for the unit.
When oven is cool, remove any obstructions
like baked-on food or aluminum foil.
Loading ...
Loading ...
Loading ...