Loading ...
Loading ...
Loading ...
18
OPERATING INSTRUCTIONS
1. Remove the battery cover from the back of the remote
found in remote pack (U). Insert the battery from remote
pack (U) into the remote; ensuring the polarity of the
battery matches the polarity indicated in the battery
compartment -- positive (+) to positive (+) and negative
(-) to negative (-). Replace the battery cover and press
the fan power button on the remote to ensure the LED
indicator illuminates and the remote turns on the fan.
Note: If remote doesn’t turn on the fan, see
TROUBLESHOOTING (page 20).
2. To operate the fan using the remote, press and release
the following buttons:
1 - High fan speed
2 - Medium fan speed
3 - Low fan speed
4 - Fan Power - Turns the fan o.
Light Delay O mode - Press and hold the fan
power button (4) for ve seconds, which will turn
o light after one minute. The LED indicator on the
remote will ash four times to conrm mode setting.
5 - Light Control: Tap light control button to turn the light
o and on. Press and hold light control button to dim
or brighten the lights.
6 - D/CFL Switch - set to “D” at the factory. The switch
should remain in the “D” position to ensure the LED
bulb is dimmable.
1
2
3
4
5
6
2
1
Remote
Front
Back
Battery
Battery
Compartment
2
LED Indicator
LED Indicator
Fan Power
Loading ...
Loading ...
Loading ...