Loading ...
Loading ...
Loading ...
126
Phenomenon Cases not involving a machine defect
Reference
page
The IR and
RS-232C does
not work on
HDBaseT
TM
connection.
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the
SETUP menu.
78
HDBaseT
connection
does not work.
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the
SETUP menu.
78
The connected equipment may not be supported by
HDBaseT.
Refer to User's manual(detailed) for connection.
14
IR and LAN
does not work
via HDBaseT.
Check if the IR setting is OFF under HDBaseT.
EASY MENU > ADVANCED MENU > OPTION >
SERVICE
> REMOTE RECEIV.
95
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU > NETWORK >
WIRED NETWORK
–
LAN does not
work, if LAN is
connected to
the projector
while having
an input signal
from HDBaseT.
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU > NETWORK >
WIRED NETWORK
–
This projector is compatible with 100BASE-T only.
Check the specication of the connected equipments.
–
If the LAN cable is connected with the hub, try to change
the connected port at the hub
–
If the LAN cable is connected directly to the computer,
try to connect to other computer
–
No image is
displayed via
HDBaseT.
Check the LAN cable if it is CAT5e certied or higher.
–
Try to change the LAN cable.
–
If the LAN cable is connected with more than 3 extension
connector, the transmission of 100 meters may fail.
–
Check if the extension connector is compatible with
CAT5e.
All LAN cable and extension connector connected with
HDBaseT port must be CAT5e certied.
–
(continued on next page)
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Loading ...
Loading ...
Loading ...