Loading ...
Loading ...
Loading ...
Make sure the lint filter is cleaned before every load. Wkh some loads
that produce high amounts of lint, it may be necessary to clean the filter
during the cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton towel)
Lint on clothes
and they should be drbd separately from clothes that are lint trappers (for
example, a pair of lack linen pants)
Divide larger loads into smaller loads for drying
Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled Small loads of 1 to 4 items work best.
afterWrinkle-Care Load fewer garments.Load simibr-type garments.
Odors remain in Fabrics containing strong odors should be dried in a normal cycle.
clothing after Refresh,
Water drips from This is steam condensation. The dripping water will stop after a short time.
nozzle when Steam-
Care starts
Sprayed water is not Sprayed water is difficult to see when the door is closed.
visible during Steam-
Care
Extended time Verify correct loading (clothes)/cycle selection (see page 23).
Information codes
Information codes may be displayed to help you better understand what is occurring with your Dryer.
The thermistor resistance is very low Clean the screen or vent.
or high. Ifthe problem continues, call for service.
j Invalid heating Temp when the dryer Call f,or service.
j is running.
J Clean the door and then restart.
J dE The door is open
j If,the problem continues, call for service.
i Make sure a button is NOT being pressed
Invalid state of key. continuously.Try restarting the cycle.
i If,the problem continue, call for service.
Try restarting the cycle.
i If,the problem continues, call for service.
i E ectron c Contro Prob em Call for service.
91:1
j (Over Voltage Error)
i Electronic Control Problem Call for service.
i AE
i <CommunicationError)
i
j EEE Invalid state of Eeprom communication Call for service.
i dF Invalid door. , Call for service.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
English _35
Loading ...
Loading ...
Loading ...