Loading ...
Loading ...
Loading ...
You can customize your wash cycle by adding one or more of the
following options to your wash: CATALYSTTM cleaning action,
Soak, Drain/Spin or Rinse/Spin.
• A single tone sounds when a selection is accepted.
• Two short tones sound if an unavailable selection is made.
CATALYST TM Cleaning Action
Your washer uses CATALYST cleaning action to help ensure
better soil and stain removal from your wash load. CATALYST
cleaning action reduces the need for pretreatment and is safe for
all fabrics. CATALYST cleaning action is pre-selected inthe Heavy
Duty and Whitest Whites cycles and is automatically added to the
Express Wash and Handwash Casual cyles. The CATALYST
option can be added to any wash cycle.
How CATALYST cleaning action works
1. Before agitation begins, detergent is automatically released
into a special chamber that mixes the detergent with a small
amount of water to create a sudsy cleaning solution.
2. Spinning spreads out the clothes.
3. The cleaning solution showers onto the top of the fabrics. The
solution is pulled through the clothes, and the detergent
enzymes attach to soils and stains, lifting them away.
4. A sensor alerts the washer when the cleaning solution
completely penetrates the stains and soils and a rich, sudsy
lather covers the clothes. The washer fills to the selected
water level and completes the selected cycle.
NOTES:
• For best results, the load should be dry at the start of the
cycle.
• Stubborn and set-in stains might require additional
pretreatment.
To select or cancel CATALYST cleaning action
Press the CATALYST pad to select CATALYST cleaning action.
The CATALYST option must be selected or canceled before Start
is pressed.
OPllONS
Soak
Use Soak for heavy soils and stains that need additional time for
removal. You can add Soak to a wash cycle, or you can select a
Soak only.
To add Soak to a wash cycle
When Soak is added to a wash cycle, the washer fills to the
selected water level, agitates briefly and soaks for a few minutes
before the wash cycle begins. The amount of soak time varies
with each cycle, but is not longer than 12 minutes.
1. Select a cycle.
2. Press On/Off until the Soak light glows.
3. Press Start.
To select a Soak only
When a Soak only is selected, the washer fills to the selected
water level, agitates briefly and soaks. The preset soak time is 30
minutes. If a different soil level is selected, the soak time
increases or decreases, depending on the selection. After
soaking, the washer agitates briefly, drains and spins. Soak only
should be followed by a wash cycle, as there is no rinse.
1. Place a sorted load of clothes into the washer. Add detergent
to the detergent dispenser.
2. Press On/Off until the Soak light glows. The preset settings
will glow. If desired, change settings.
3. Close washer lid. Press Start.
Drain/Spin, Rinse/Spin or 2nd Rinse
When using extra detergent for heavily soiled clothes, or washing
special-care items, you may find an extra rinse and spin is
needed. The Rinse/Spin option may also be used for items that
need rinsing only or for completing a cycle after a power failure.
An extra drain and spin may help shorten drying times for some
heavy fabrics or special-care items by removing excess water.
The Spin option may also be used for draining the washer after
canceling a cycle or completing a cycle after a power failure.
o BPJUNI SRN
o RINSE 15FIN
o 2NB RINSE
To add an extra Rinse/Spin or Spin to a cycle
1. Select a cycle.
2. Press On/Off until the light glows for the desired option.
3. Press Start.
To select a Rinse/Spin or a Spin only
1. Place a load of clothes into the washer.
2. Press On/Off until the light glows for the desired option.
3. Press Start.
Modifiers allow you to further customize your cycles and save
energy.
Water Level
Select a water level based on the size of your load. Clothes
should move freely and roll toward the agitator.
(ND
To change to a higher water level after the washer starts to
agitate, press WATER LEVEL until the light glows by the desired
water level.
NOTE: Ifyou select a water level below medium, the washer
automatically lowers the agitation speed to improve fabric care,
This change occurs in all cycles except Handwash Casual and
Ultra Handwash.
14
Loading ...
Loading ...
Loading ...